–
Make sure that the paper is not loaded above the point where the paper guide starts to bend to
prevent any trouble.
–
Up to 2,000 sheets of plain paper can be loaded.
Note
For details, refer to chapter 1, "Before making copies", of the User's Guide [Copy Operations].
Loading paper into the bypass tray
Paper can be fed manually through the bypass tray when you wish to print onto paper of a size that is not
loaded into a paper tray, or when you wish to print onto thick paper, OHP transparencies, envelopes, label
sheets or other special paper.
Follow the procedure described below to load paper into the bypass tray.
1
Open the bypass tray.
–
When loading large-sized paper, pull out the tray extension.
2
Load the paper into the tray.
–
Load paper so that the side to be printed on faces downward.
–
Do not load so many pages that the top of the stack is higher than the , mark.
–
Up to 150 sheets plain paper can be loaded.
–
Slide the lateral guides to fit the size of paper to be loaded.
x-32
VarioLink 5022/VarioLink 4222/VarioLink 3622