Control Panel - Oce VarioLink 5022 Quick Manual

Control panel

The control panel consists of the touch panel, which can be used to specify settings for the various functions,
and various keys, such as the [Start] key and the [Stop] key. The operations that can be performed with these
keys are described below.
In this manual, [ ] indicates keys on the control panel and buttons in the touch panel.
22
21
20
19
18
17
16
15
No. Part Name
1 Touch panel
2 Main Power indicator
3 [Power] (auxiliary power) key
4 [Memory Mode] key
5 [Utility/Counter] key
6 [Reset] key
7 [Interrupt] key
8 [Stop] key
9 [Proof Copy] key
x-24
1
14 13 12 11
Description
Displays various screens and messages.
Specify the various settings by directly touching the panel.
Lights up in green when the machine is turned on with the main power
switch.
Press to turn on/off machine operations. When turned off, the machine
enters a state where it conserves energy.
Press to register (store) the desired copy/fax/scan settings as a pro-
gram or to recall a registered program.
Press to display the Utility/Counter screen.
Press to clear all settings (except programmed settings) entered in the
control panel and touch panel.
Press to enter Interrupt mode. While the machine is in Interrupt mode,
the indicator on the key lights up in green and the message "Now in In-
terrupt mode." appears on the touch panel. To cancel Interrupt mode,
press the [Interrupt] key again.
Pressing the [Stop] key during an operation temporarily stops the op-
eration.
Before printing a large number of copies, a single proof copy can first
be printed in order to be checked.
VarioLink 5022/VarioLink 4222/VarioLink 3622
10 9
2
3
4
5
6
7
8