Oce VarioLink 5022 Quick Manual page 217

6
Available Finishing settings
The Finishing settings that are available differ depending on the installed options. For details, refer to chapter
2, "Basic copy operations", of the User's Guide [Copy Operations].
Setting
Sort
Group
Offset
Staple
Punch
Center Sta- Half-Fold
ple/Fold
Center Staple & Fold
Note
For details, refer to chapter 6, "Use Document", of the User's Guide [Box Operations].
6-14
Description
Select this setting to separate each set of a multi-page document.
Select this setting to separate the copies of each page in a multi-page doc-
ument.
When a finisher is not in- If the sorting conditions are met, copies are
stalled fed out and sorted in an alternating criss-
cross pattern.
When a finisher is installed The copies are fed out shifted to separate
them.
Copies can be stapled in the corner or at two locations.
Holes for filing can be punched in the copies
Select this setting to fold copies in half before feeding them out.
Select this setting to staple copies at two locations along the center, then
fold the copies in half before feeding them out.
VarioLink 5022/VarioLink 4222/VarioLink 3622
Useful box operations