Lexmark XM3150 User Manual page 47

Additional printer setup
Make sure to match the following:
• The USB symbol on the cable with the USB symbol on the printer
•
The appropriate Ethernet cable with the Ethernet port
Warning—Potential Damage: Do not touch the USB cable, any network adapter, or the printer in the area shown
while actively printing or scanning. Loss of data or a malfunction can occur.
Use the
1 Printer power cord
socket
2 Power switch
3 Ethernet port
4 EXT port
5 LINE port
6 USB port
7 USB printer port
8 Security slot
8
7
6
5
4
To
Connect the printer to a properly grounded electrical outlet.
Turn the printer on or off.
Connect the printer to an Ethernet network.
Connect additional devices (telephone or answering machine) to the printer and the
telephone line. Use this port if you do not have a dedicated fax line for the printer and if this
connection method is supported in your country or region.
Note: Remove the adapter plug to access the port.
Connect the printer to an active telephone line through a standard wall jack (RJ‑11), DSL filter,
or VoIP adapter, or any other adapter that allows you to access the telephone line to send
and receive faxes.
Attach a supported printer keyboard.
Connect the printer to a computer.
Attach a lock that will secure the printer in place.
2
3
1
47