Page 1 XM3150 User's Guide October 2014 www.lexmark.com Machine type(s): 7016 Model(s):...
Page 2: Table Of Contents
Contents Contents Safety information..................7 Learning about the printer................9 Finding information about the printer......................9 Selecting a location for the printer......................10 Printer configurations..........................11 Using the Embedded Web Server......................13 Understanding the basic functions of the scanner..................14 Using the ADF and scanner glass......................14 Understanding the printer control panel............15 Setting up and using the home screen applications........20 Finding the IP address of the computer....................20 Finding the IP address of the printer.......................20...
Page 3 Contents Installing hardware options........................43 Order of installation............................43 Installing optional trays ............................43 Setting up the printer software.......................46 Installing the printer ............................46 Adding available options in the print driver .....................46 Attaching cables............................46 Networking..............................48 Preparing to set up the printer on an Ethernet network..................48 Preparing to set up the printer on a wireless network..................48 Connecting the printer using the Wireless Setup Wizard.................49 Connecting the printer to a wireless network using Wi‑Fi Protected Setup ............50...
Page 4 Contents Printing information pages........................82 Canceling a print job..........................82 Copying......................84 Making copies............................84 Copying photos............................85 Copying on specialty media........................85 Customizing copy settings........................86 Placing information on copies.........................92 Canceling a copy job..........................92 Understanding the copy options......................93 E-mailing....................95 Setting up the printer to e-mail.......................95 Creating an e-mail shortcut........................96 E-mailing a document..........................97 Customizing e-mail settings........................98 Canceling an e-mail..........................99...
Page 5 Using Schedule Power Modes ........................216 Adjusting the brightness of the printer display ....................216 Recycling..............................217 Recycling Lexmark products ...........................217 Recycling Lexmark packaging..........................217 Returning Lexmark cartridges for reuse or recycling..................217 Securing the printer..................219 Statement of Volatility..........................219 Erasing volatile memory........................219 Erasing non‑volatile memory........................220 Erasing printer hard disk memory......................220...
Page 6 Contents Storing supplies.............................227 Replacing supplies..........................227 Replacing the toner cartridge .........................227 Replacing the imaging unit ..........................229 Replacing the staple cartridge ........................231 Moving the printer..........................233 Before moving the printer ..........................233 Moving the printer to another location......................234 Shipping the printer ............................234 Managing the printer................235 Finding advanced networking and administrator information.............235 Checking the virtual display........................235 Setting up e‑mail alerts.........................235...
Page 7: Safety Information
Safety information Safety information Connect the power cord directly to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible. CAUTION—POTENTIAL INJURY: Do not use this product with extension cords, multioutlet power strips, multioutlet extenders, or other types of surge or UPS devices. The power rating capacity of these types of accessories can be easily overloaded by a laser printer and may result in poor printer performance, property damage, or potential fire.
Page 8 If you purchased a multifunction printer (MFP) that scans, copies, and faxes, then you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters. CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed.
Page 9: Learning About The Printer
Caring for and maintaining the printer • Troubleshooting and solving problems Information on setting up and configuring the accessibility Lexmark Accessibility Guide—This guide is available at features of your printer. http://support.lexmark.com. Help using the printer software Windows or Mac Help—Open a printer software program or application, and then click Help.
Page 10: Selecting A Location For The Printer
Learning about the printer What are you looking for? Find it here The latest supplemental information, updates, and customer Lexmark support Web site— support: http://support.lexmark.com • Documentation Note: Select your country or region, and then select your product to view the appropriate support site.
Page 11: Printer Configurations
CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using multiple input options. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, then you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.
Page 12 Learning about the printer Basic model Display Automatic document feeder (ADF) ADF tray ADF bin Standard bin Multipurpose feeder Standard 550‑sheet tray Note: A lockable 550‑sheet tray is also available. For more information, contact the place where you purchased the printer.
Page 13: Using The Embedded Web Server
Learning about the printer Configured model Optional 250‑sheet tray Optional 550‑sheet tray Optional stapler Using the Embedded Web Server Note: This feature is available only in network printers or printers connected to print servers. If the printer is installed on a network, then you can use the Embedded Web Server to do the following: •...
Page 14: Understanding The Basic Functions Of The Scanner
Learning about the printer Press Enter. The Embedded Web Server page appears. Understanding the basic functions of the scanner • Make quick copies or set the printer to perform specific copy jobs. • Send a fax using the printer control panel. •...
Page 15: Understanding The Printer Control Panel
Understanding the printer control panel Understanding the printer control panel Using the printer control panel Use the Display • View the printer status and messages. • Set up and operate the printer. Home button Go to the home screen. Sleep button Enable Sleep mode or Hibernate mode.
Page 16: Understanding The Home Screen
Understanding the printer control panel Indicator light Printer status Solid green The printer is on, but idle. Blinking red The printer requires user intervention. Sleep button light Printer status The printer is off, idle or in Ready state. Solid amber The printer is in Sleep mode.
Page 17 Understanding the printer control panel Touch Bookmarks Create, organize, and save a set of bookmarks (URL) into a tree view of folders and file links. Note: The tree view supports only bookmarks created from this function, and not from any other application.
Page 18 Understanding the printer control panel Feature Description Printer IP address The IP address of your network printer is located at the upper left corner of the home screen and appears as four sets of numbers separated by periods. You can Example: use the IP address when accessing the Embedded Web Server so you can view and 123.123.123.123...
Page 19 Understanding the printer control panel Touch Cancel • Cancel an action or a selection. • Exit a screen and return to the previous screen without saving changes. Reset Reset values on the screen.
Page 20: Setting Up And Using The Home Screen Applications
Some applications are supported only in some printer models. • There may be additional solutions and applications available for purchase. For more information, go to www.lexmark.com or contact the place where you purchased the printer. Finding the IP address of the computer For Windows users In the Run dialog box, type cmd to open the command prompt.
Page 21: Customizing The Home Screen
Setting up and using the home screen applications Press Enter. Note: If you are using a proxy server, then temporarily disable it to load the Web page correctly. Customizing the home screen Open a Web browser, and then type the printer IP address in the address field. Note: View the printer IP address on the printer home screen.
Page 22: Activating The Home Screen Applications
Note: A later version of this User's Guide may contain a direct link to the Administrator’s Guide of this application. To check for updates of this User’s Guide, go to http://support.lexmark.com. Streamline work processes by letting you quickly find and print frequently used online forms directly from the printer home screen.
Page 23: Setting Up Card Copy
Note: A later version of this User's Guide may contain a direct link to the Administrator's Guide of this application. To check for updates of this User's Guide, go to http://support.lexmark.com. Quickly and easily copy insurance, identification, and other wallet‑size cards.
Page 24: Setting Up Multi Send
Note: A later version of this User's Guide may contain a direct link to the Administrator's Guide of this application. To check for updates of this User's Guide, go to http://support.lexmark.com. Scan a document, and then send the scanned document to multiple destinations.
Page 25: Setting Up Remote Operator Panel
Setting up and using the home screen applications Scan a document and send it to a shared network folder. You can define up to 30 unique folder destinations. Notes: • The printer must have permission to write to the destinations. From the computer where the destination is specified, use sharing, security, and firewall settings to allow the printer at least a write access.
Page 26: Exporting And Importing A Configuration
Setting up and using the home screen applications Exporting and importing a configuration You can export configuration settings into a text file, and then import the file to apply the settings to other printers. Open a Web browser, and then type the printer IP address in the address field. Note: View the printer IP address on the printer home screen.
Page 27: Additional Printer Setup
Fonts • Firmware Forms Barcode Prescribe IPDS Printcryption • Printer hard disk • Lexmark Internal Solutions Ports (ISP) – Parallel 1284‑B interface – MarkNet N8130 10/100 fiber interface – MarkNet N8350 802.11 b/g/n Wireless Print Server – RS‑232‑C serial interface...
Page 28: Accessing The Controller Board
Additional printer setup Accessing the controller board CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
Page 29: Installing A Memory Card
Memory card connector Option card connector Printer hard disk connector Lexmark Internal Solutions Port connector Close the shield, and then the access door. Installing a memory card CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing.
Page 30 Additional printer setup Align the notch (1) on the memory card with the ridge (2) on the connector. Push the memory card straight into the connector, and then push the card toward the controller board wall until it clicks into place. Close the controller board shield, and then the controller board access door.
Page 31: Installing An Optional Card
Additional printer setup Installing an optional card CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
Page 32: Installing An Internal Solutions Port
Note: The entire length of the connector on the card must touch and be flush with the controller board. Installing an Internal Solutions Port The controller board supports one optional Lexmark Internal Solutions Port (ISP). Note: This task requires a flat‑head screwdriver.
Page 33 Additional printer setup Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch a metal surface on the printer before touching any controller board electronic components or connectors. Open the controller board access door. Lightly press the stop on the left side of the access door, and then slide the access door to remove it. Unpack the ISP kit.
Page 34 Additional printer setup ISP solution Screw to attach the ISP to the bracket ISP exterior cover Screws to attach the ISP metal bracket to the printer cage Plastic bracket Long ISP cable Place the plastic bracket inside the ISP exterior cover until it clicks into place. Slide and push the ISP solution into the plastic bracket.
Page 35 Additional printer setup Secure the ISP solution to the plastic bracket using the long screw. Tighten the two screws on the end of the ISP solution.
Page 36 Additional printer setup Attach the white plug of the ISP solution interface cable into the white receptacle on the ISP. Attach the ISP exterior cover at an angle by inserting the left hinges first.
Page 37 Additional printer setup Lower the rest of the cover, and then slide the cover to the right. Run the ISP cable through the controller board shield.
Page 38 Additional printer setup Open the shield using the green handle. Attach the blue plug of the ISP solution interface cable into the blue receptacle on the controller board. Note: If you have installed a printer hard disk, then you need to remove it. For more information, see “Removing a printer hard disk”...
Page 39: Installing A Printer Hard Disk
Additional printer setup Close the shield. Close the ISP exterior cover. Note: When the printer software and any hardware options are installed, it may be necessary to manually add the options in the printer driver to make them available for print jobs. For more information, see “Adding available options in the print driver”...
Page 40 Additional printer setup Using a flat‑head screwdriver, loosen the screws. Insert the plug of the printer hard disk interface cable into the receptacle of the controller board. Note: The plug and the receptacle are color‑coded blue.
Page 41 Additional printer setup Align the screws on the printer hard disk to the slots on the controller board bracket, and then slide the printer hard disk onto the brackets. Tighten the two screws. Close the controller board shield, and then close the controller board access door. Note: When the printer software and any hardware options are installed, you may need to manually add the options in the printer driver to make them available for print jobs.
Page 42: Removing A Printer Hard Disk
Additional printer setup Removing a printer hard disk Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch a metal surface on the printer before touching any controller board electronic components or connectors. Access the controller board. For more information, see “Accessing the controller board”...
Page 43: Installing Hardware Options
If you purchased a multifunction printer (MFP) that scans, copies, and faxes, then you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters. Install the printer and any hardware options you have purchased in the following order: •...
Page 44 Additional printer setup Unpack the tray, and then remove all packing material. Pull out the tray from the base. Remove any packing material from inside the tray. Insert the tray into the base. Place the tray near the printer. Align the printer with the tray, and then slowly lower the printer into place. Note: Optional trays lock together when stacked.
Page 45 Additional printer setup Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer. Notes: • When the printer software and any hardware options are installed, you may need to manually add the options in the printer driver to make them available for print jobs.
Page 46: Setting Up The Printer Software
Additional printer setup Setting up the printer software Installing the printer Obtain a copy of the software installer package. Run the installer, and then follow the instructions on the computer screen. For Macintosh users, add the printer. Note: Obtain the printer IP address from the TCP/IP section in the Network/Ports menu. Adding available options in the print driver For Windows users Open the printers folder.
Page 47 Additional printer setup Make sure to match the following: • The USB symbol on the cable with the USB symbol on the printer • The appropriate Ethernet cable with the Ethernet port Warning—Potential Damage: Do not touch the USB cable, any network adapter, or the printer in the area shown while actively printing or scanning.
Page 48: Networking
Additional printer setup Networking Notes: • Purchase a MarkNet N8350 wireless network adapter before setting up the printer on a wireless network. For information on installing the wireless network adapter, see the instruction sheet that came with the adapter. • A Service Set Identifier (SSID) is a name assigned to a wireless network.
Page 49: Connecting The Printer Using The Wireless Setup Wizard
Additional printer setup • Security Method—There are four basic options for Security Method: – WEP key If your network uses more than one WEP key, then enter up to four in the provided spaces. Select the key currently in use on the network by selecting the default WEP transmit key. –...
Page 50: Connecting The Printer To A Wireless Network Using Wi-Fi Protected Setup
Additional printer setup Search for networks Show available wireless connections. Note: This menu item shows all broadcast secured or unsecured SSIDs. Enter a network name Manually type the SSID. Note: Make sure to type the correct SSID. Wi‑Fi Protected Setup Connect the printer to a wireless network using Wi‑Fi Protected Setup. Follow the instructions on the printer display.
Page 51: Connecting The Printer To A Wireless Network Using The Embedded Web Server
Additional printer setup Connecting the printer to a wireless network using the Embedded Web Server Before you begin, make sure that: • Your printer is connected temporarily to an Ethernet network. • A wireless network adapter is installed in your printer and working properly. For more information, see the instruction sheet that came with the wireless network adapter.
Page 52: Setting Up Serial Printing (Windows Only)
Additional printer setup Apply the changes. Setting up serial printing (Windows only) After installing the serial or communication (COM) port, configure the printer and the computer. Note: Serial printing reduces print speed. Set the parameters in the printer. From the control panel, navigate to the menu for the port settings. Locate the menu for the serial port settings, and then adjust the settings, if necessary.
Page 53: Loading Paper And Specialty Media
Loading paper and specialty media Loading paper and specialty media The selection and handling of paper and specialty media can affect how reliably documents print. For more information, “Avoiding jams” on page 238 “Storing paper” on page Setting the paper size and type From the home screen, navigate to: >...
Page 54 Loading paper and specialty media Squeeze, and then slide the width guide tab to the correct position for the size of the paper you are loading.
Page 55 Loading paper and specialty media Squeeze, and then slide the length guide tab to the correct position for the size of the paper you are loading. Notes: • For some paper sizes like letter, legal, and A4, squeeze, and then slide the length guide tab backward to accommodate their length.
Page 56 Loading paper and specialty media Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. Load the paper stack with the printable side facedown. •...
Page 57 Loading paper and specialty media Without an optional staple finisher With an optional staple finisher One‑sided printing One‑sided printing Two‑sided (duplex) printing Two‑sided (duplex) printing • Make sure the paper is below the maximum paper fill indicator located on the side of the width guide. Overfilling may cause paper jams.
Page 58: Loading The Multipurpose Feeder
Loading paper and specialty media Insert the tray. From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray. Note: Set the correct paper size and paper type to avoid paper jams and print quality problems. Loading the multipurpose feeder Use the multipurpose feeder when printing on different paper sizes and types or specialty media, such as card stock, transparencies, paper labels, and envelopes.
Page 59 Loading paper and specialty media Pull the multipurpose feeder extender. Pull the extender gently so that the multipurpose feeder is fully extended and open.
Page 60 Loading paper and specialty media Squeeze the tab on the left width guide, and then move the guides for the paper you are loading. Prepare the paper or specialty media for loading. • Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.
Page 61 Loading paper and specialty media Notes: • Do not force paper or specialty media into the multipurpose feeder. • Make sure the paper or specialty media is below the maximum paper fill indicator located on the paper guides. Overfilling may cause paper jams. •...
Page 62 Loading paper and specialty media • Load letterhead faceup with the top edge entering the printer first. For two‑sided (duplex) printing, load letterhead facedown with the bottom edge entering the printer first.
Page 63: Using The Standard Bin And Paper Stop
Loading paper and specialty media • Load envelopes with the flap on the left side facedown. Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self‑stick adhesives. These envelopes may severely damage the printer. From the printer control panel, set the paper size and paper type in the Paper menu to match the paper or specialty media loaded in the multipurpose feeder.
Page 64: Linking And Unlinking Trays
Loading paper and specialty media Linking and unlinking trays The printer links trays when the specified paper size and type are the same. When a linked tray becomes empty, paper feeds from the next linked tray. To prevent trays from linking, assign a unique custom paper type name. Linking and unlinking trays Open a Web browser, and then type the printer IP address in the address field.
Page 65: Assigning A Custom Paper Type
Loading paper and specialty media Using the printer control panel From the home screen, navigate to: > Paper Menu > Custom Names Select a custom name, and then type a custom paper type name. Touch Touch Custom Types, and then verify that the new custom paper type name has replaced the custom name. Assigning a custom paper type Using the Embedded Web Server Assign a custom paper type name to a tray when linking or unlinking trays.
Page 66 Loading paper and specialty media • If you are using a proxy server, then temporarily disable it to load the Web page correctly. Click Settings > Paper Menu > Custom Types. Select a custom name you want to configure, then select a paper or specialty media type, and then click Submit. Using the printer control panel From the home screen, navigate to: >...
Page 67: Paper And Specialty Media Guide
The printer may print at a reduced speed to prevent damage to the fuser. • For more information on card stock and labels, see the Card Stock & Label Guide on the Lexmark support Web site at http://support.lexmark.com. Using specialty media Tips on using letterhead •...
Page 68: Tips On Using Labels
Print samples on the labels being considered for use before buying large quantities. Note: Use only paper label sheets. Vinyl, pharmacy, and two‑sided labels are not supported. For more information on label printing, characteristics, and design, see the Card Stock & Label Guide available at http://support.lexmark.com. When printing on labels: •...
Page 69: Paper Guidelines
Paper and specialty media guide Tips on using card stock Card stock is heavy, single‑ply specialty media. Many of its variable characteristics, such as moisture content, thickness, and texture, can significantly impact print quality. Print samples on the card stock being considered for use before buying large quantities.
Page 70: Moisture Content
Paper and specialty media guide Moisture content The amount of moisture in paper affects both print quality and the ability of the printer to feed the paper correctly. Leave paper in its original wrapper until it is time to use it. This limits the exposure of paper to moisture changes that can degrade its performance.
Page 71: Selecting Preprinted Forms And Letterhead
Lexmark consistently tests its printers with recycled paper (20–100% post-consumer waste) and a variety of test paper from around the world, using chamber tests for different temperature and humidity conditions. Lexmark has found no reason to discourage the use of today's recycled office papers, but generally the following property guidelines apply to recycled paper.
Page 72: Supported Paper Sizes, Types, And Weights
Paper and specialty media guide Storing paper Use these paper storage guidelines to help avoid jams and uneven print quality: • For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40 percent. Most label manufacturers recommend printing in a temperature range of 18–24°C (65–75°F) with relative humidity between 40 and 60 percent.
Page 73 Paper and specialty media guide Paper size and dimension Standard Optional 250‑ or Multipurpose Scanner Duplex 550‑sheet tray 550‑sheet tray feeder glass printing Legal 215.9 x 355.6 mm (8.5 x 14 in.) Executive 184.2 x 266.7 mm (7.25 x 10.5 in.) Oficio (México) 215.9 x 340.4 mm (8.5 x 13.4 in.)
Page 74: Supported Paper Types And Weights
Paper and specialty media guide Paper size and dimension Standard Optional 250‑ or Multipurpose Scanner Duplex 550‑sheet tray 550‑sheet tray feeder glass printing Other Envelope 85.7 x 165 mm to 215.9 x 355.6 mm (3.375 x 6.50 in. to 8.5 x 14 in.) Paper is supported only if the paper size setting is set to Universal.
Page 75 Paper and specialty media guide Paper sizes, types, and weights supported by the optional finisher Supported paper sizes Paper size Dimensions Staple finisher 210 x 297 mm (8.3 x 11.7 in.) 148 x 210 mm (5.8 x 8.3 in.) 105 x 148 mm (4.1 x 5.8 in.) JIS B5 182 x 257 mm (7.2 x 10.1 in.) Letter...
Page 76 Paper and specialty media guide Paper type Staple finisher Letterhead Preprinted Colored paper Light paper Heavy paper Rough/Cotton Custom Type [x]...
Page 77: Printing
Printing Printing Printing forms and a document Printing forms Use Forms and Favorites to quickly and easily access frequently used forms or other information that is regularly printed. Before you can use this application, first set it up on the printer. For more information, see “Setting up Forms and Favorites”...
Page 78: Printing From A Flash Drive Or Mobile Device
Printing Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. Click Settings >...
Page 79: Printing From A Mobile Device
Printing from a mobile device To download a compatible mobile printing application, visit www.lexmark.com/mobile. Note: Mobile printing applications may also be available from your mobile device manufacturer. Supported flash drives and file types Notes: •...
Page 80: Printing Confidential And Other Held Jobs
Printing Recommended flash drives File type Documents: • Lexar JumpDrive FireFly (512MB and 1GB) • .pdf • SanDisk Cruzer Micro (512MB and 1GB) • .xps • Sony Micro Vault Classic (512MB and 1GB) Images: • .dcx • .gif • .jpeg or .jpg •...
Page 81: Modifying Confidential Print Settings
Printing Touch Submit. Printing confidential and other held jobs Note: Confidential and Verify print jobs are automatically deleted from memory after printing. Repeat and Reserve jobs are held in the printer until you delete them. For Windows users With a document open, click File > Print. Click Properties, Preferences, Options, or Setup.
Page 82: Printing Information Pages
Printing • If you are using a proxy server, then temporarily disable it to load the Web page correctly. Click Settings > Security > Confidential Print Setup. Modify the settings: • Set a maximum number of PIN entry attempts. When a user exceeds that number, all of the jobs for that user are deleted.
Page 83 Printing For Macintosh users From System Preferences in the Apple menu, navigate to your printer. From the print queue, select the print job you want to cancel, and then delete it.
Page 84: Copying
Copying Copying Automatic document feeder (ADF) Scanner glass Use the ADF for multiple‑page documents. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). Making copies Making a quick copy Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Page 85: Copying Photos
Copying From the home screen, navigate to: Copy > specify the copy settings > Copy It Copying using the scanner glass Place an original document facedown on the scanner glass in the upper left corner. From the home screen, navigate to: Copy >...
Page 86: Customizing Copy Settings
Copying Navigate to: Copy to > select the tray that contains transparencies > Copy It If there are no trays that contain transparencies, then navigate to: Manual Feeder > > select the size of the transparencies > > Transparency > Load transparencies into the multipurpose feeder, and then touch Copy It.
Page 87: Making Copies Using Paper From A Selected Tray
Copying Making copies using paper from a selected tray Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray.
Page 88: Reducing Or Enlarging Copies
Copying • The ADF indicator light comes on when the paper is loaded properly. If you are loading a document into the ADF tray, then adjust the paper guides. From the home screen, navigate to: Copy > Copy from > Mixed Sizes > Navigate to: Copy to >...
Page 89: Adjusting Copy Quality
Copying From the Scale area, touch to decrease or increase the value by 1%. Touching “Copy to” or “Copy from” after setting Scale manually changes the scale value back to Auto. Note: Auto is the factory default setting. This automatically adjusts the scan image of the original document to fit the size of the paper onto which you are copying.
Page 90: Placing Separator Sheets Between Copies
Copying Collated Not collated Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray.
Page 91 Copying Notes: • Make sure to set the paper size to letter, legal, A4, or JIS B5. • Make sure to set the copy size to 100%. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: •...
Page 92: Placing Information On Copies
Copying Placing information on copies Placing a header or footer on pages Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray.
Page 93: Understanding The Copy Options
Copying Canceling a copy job while pages are being printed From the printer control panel, touch Cancel Job or press on the keypad. Touch the job you want to cancel, and then touch Delete Selected Jobs. Note: If you press on the keypad, then touch Resume to return to the home screen.
Page 94: Save As Shortcut
Copying Collate This option keeps the pages of a print job stacked in sequence when printing multiple copies of the document. Copies This option lets you set the number of copies to be printed. Content This option lets you set the original document type and source. Select from the following content types: •...
Page 95: E-Mailing
E-mailing E-mailing Automatic document feeder (ADF) Scanner glass Use the ADF for multiple‑page documents. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). You can use the printer to e‑mail scanned documents to one or more recipients. There are three ways to send an e‑mail from the printer.
Page 96: Creating An E-Mail Shortcut
E-mailing Creating an e-mail shortcut Creating an e-mail shortcut using the Embedded Web Server Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Page 97: E-Mailing A Document
E-mailing E-mailing a document You can use the printer to e‑mail scanned documents to one or more recipients in a number of ways. You can type the e‑mail address, use a shortcut number, or use the address book. You can also use the Multi Send or MyShortcut application from the home screen.
Page 98: Customizing E-Mail Settings
E-mailing Sending an e‑mail using the address book Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray.
Page 99: Canceling An E-Mail
E-mailing Select the file type you want to send. Note: If you select Secure PDF, then you will be prompted to enter your password twice. Touch > Send It. Canceling an e-mail • When using the ADF, touch Cancel Job while Scanning appears. •...
Page 100 E-mailing Send As This option lets you set the output type for the scan image. Select one of the following: • PDF—Use this to create a single file with multiple pages. This can be sent as a secured or compressed file. •...
Page 101 E-mailing Scan Preview This option lets you view the first page of the image before it is included in the e-mail. When the first page is scanned, the scanning is paused and a preview image appears. Note: This option appears only when a working printer hard disk is installed. Using the advanced options Select from the following settings: •...
Page 102: Faxing
Faxing Faxing Note: Fax capabilities are available only in some printer models. Automatic document feeder (ADF) Scanner glass Use the ADF for multiple‑page documents. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).
Page 103: Initial Fax Setup
Faxing Initial fax setup Many countries and regions require outgoing faxes to contain the following information in a margin at the top or bottom of each transmitted page, or on the first page of the transmission: fax name (identification of the business, other entity, or individual sending the message) and fax number (telephone number of the sending fax machine, business, other entity, or individual).
Page 104: Choosing A Fax Connection
Faxing In the Fax Number field, enter the printer fax number. Click Submit. Choosing a fax connection Scenario 1: Standard telephone line Setup 1: Printer is connected to a dedicated fax line To connect: Connect one end of the telephone cable that came with the printer to the port of the printer.
Page 105 Faxing Setup 2: Printer is sharing the line with an answering machine Connected to the same telephone wall jack PHONE LINE To connect: Connect one end of the telephone cable that came with the printer to the port of the printer. Connect the other end of the telephone cable to an active analog wall jack.
Page 106 Faxing Connected to different wall jacks PHONE LINE To connect: Connect one end of the telephone cable that came with the printer to the port of the printer. Connect the other end of the telephone cable to an active analog wall jack. Tips for this setup: •...
Page 107 Faxing Setup 3: Printer is sharing the line with a telephone subscribed to voice mail service To connect: Connect one end of the telephone cable that came with the printer to the port of the printer. Connect the other end of the telephone cable to an active analog wall jack. Connect the telephone to the port of the printer.
Page 108 Faxing Scenario 2: Digital Subscriber Line (DSL) A Digital Subscriber Line splits your regular telephone line into two channels: voice and Internet. Telephone and fax signals travel through the voice channel, and Internet signals pass through the other channel. This way, you can use the same line for analog voice calls (including faxes) and digital Internet access.
Page 109 Faxing Scenario 3: VoIP telephone service To connect: Connect one end of a telephone cable to the port of the printer. Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the VoIP adapter. The port labeled Phone Line 2 or Fax Port is not always active.
Page 110 Faxing Scenario 4: Digital telephone service through a cable provider Setup 1: Printer is connected directly to a cable modem Connect one end of the telephone cable that came with your printer to the port of the printer. Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the cable modem. Note: The port labeled Phone Line 2 or Fax Port is not always active.
Page 111 Faxing Setup 2: Printer is connected to a wall jack; cable modem is installed elsewhere in the facility Connect one end of the telephone cable that came with your printer to the port of the printer. Connect the other end of the telephone cable to an active analog telephone wall jack. Connect your analog telephone to the port of the printer.
Page 112 If you are using a telephone adapter or a facility that has a cascaded or serial wiring scheme, then do not remove the adapter plug from the port of the printer. Part name Part number Lexmark adapter plug 40X8519...
Page 113 Faxing Connecting the printer to a non‑RJ‑11 wall jack LINE Connect one end of the telephone cable that came with printer to the port of the printer. Connect the other end of the cable to the RJ‑11 adapter, and then connect the adapter to the wall jack. If you want to connect another device (telephone or answering machine) to the same wall jack, and if the device has a non‑RJ‑11 connector, then connect it directly to the telephone adapter.
Page 114 Faxing Connecting the printer to a wall jack in Germany The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering machines. The F port is for telephones. N F N Connect the printer to any of the N ports. N F N PHONE LINE...
Page 115: Connecting To A Distinctive Ring Service
Faxing If you want to connect a telephone and answering machine to the same wall jack, then connect the devices as shown. Note: Do not remove the adapter plug from the port of the printer if you are connecting to a serial or cascaded telephone system.
Page 116: Sending A Fax
Faxing Setting the date and time You can set the date and time so that they are printed on every fax you send. Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen.
Page 117: Sending A Fax Using The Computer
• The fax option is available only with the PostScript driver or the Universal Fax Driver. For more information, go to http://support.lexmark.com. • To use the fax option with the PostScript driver, configure and enable it in the Configuration tab.
Page 118: Creating Shortcuts
Faxing Sending a fax using the address book The address book lets you search for bookmarks and network directory servers. For more information on enabling the address book feature, contact your system support person. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: •...
Page 119: Customizing Fax Settings
Faxing Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. Click Settings >...
Page 120: Making A Fax Lighter Or Darker
Faxing From the Resolution area, touch the arrows to select the resolution you want. Note: Select a resolution from Standard (fastest speed) to Ultra Fine (best quality at a reduced speed). Touch Fax It. Making a fax lighter or darker Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Page 121: Canceling An Outgoing Fax
Faxing Canceling an outgoing fax Canceling a fax while the original documents are still scanning • When using the ADF, touch Cancel Job on the printer control panel while Scanning appears. • When using the scanner glass, touch Cancel Job on the printer control panel while Scanning appears or while Scan the Next Page and Finish the Job appear.
Page 122: Understanding The Fax Options
Faxing From the Time menu, select the time you want the held faxes released. From the Day(s) menu, select the day you want the held faxes released. Click Add. Forwarding a fax This option lets you print and forward received faxes to a fax number, e‑mail address, FTP site, or LDSS. Open a Web browser, and then type the printer IP address in the address field.
Page 123: Delayed Send
Faxing Resolution This option lets you adjust the quality of the fax output. Increasing the image resolution increases the file size and the time needed to scan your original document. Decreasing the image resolution reduces the file size. Select one of the following: •...
Page 124 Faxing • Transmission Log—This prints the transmission log or transmission error log. • Adjust ADF Skew—This straightens scanned images that are slightly skewed when received from the ADF tray. Note: This option is supported only in select printer models.
Page 125: Scanning
Scanning Scanning Using Scan to Network Scan to Network lets you scan your documents to network destinations specified by your system support person. After the destinations (shared network folders) have been established on the network, the setup process for the application involves installing and configuring the application on the appropriate printer using its Embedded Web Server.
Page 126 Scanning Notes: • If the name or number is incorrect, then touch Cancel, and then reenter the information. • If you enter a number that is already in use, then you are prompted to select another number. Scanning to an FTP address Scanning to an FTP address using the printer control panel Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Page 127: Scanning To A Computer Or Flash Drive
Scanning Touch the name of the recipient. Note: To search for additional recipients, touch New Search, and then type the name of the next recipient. Touch > Send It. Scanning to a computer or flash drive Scanner glass Use the ADF for multiple‑page documents. Use the scanner glass for single-page documents, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).
Page 128: Scanning To A Flash Drive
Scanning Review the instructions on the Scan Profile screen. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray.
Page 129: Understanding The Scan Options
You can use the Lexmark ScanBack Utility instead of the Embedded Web Server to create scan‑to‑computer profiles. The ScanBack Utility can be downloaded from the Lexmark support Web site at http://support.lexmark.com. Set up your scan‑to‑computer profile: Launch the ScanBack Utility.
Page 130 Scanning Darkness This option lets you adjust how light or dark the scanned documents are in relation to the original document. Resolution This option lets you adjust the output quality of your file. Increasing the image resolution increases the file size and the time needed to scan your original document.
Page 131 Scanning Page Setup This option lets you change the following settings: • Sides (Duplex)—This specifies if the original document is printed on only one side or on both sides of the paper. • Orientation—This specifies the orientation of the original document, and then changes the Sides (Duplex) and Binding settings to match the orientation.
Page 132: Understanding The Printer Menus
Understanding the printer menus Understanding the printer menus Menus list Paper Menu Reports Network/Ports Security Default Source Menu Settings Page Active NIC Edit Security Settings Paper Size/Type Device Statistics Miscellaneous Security Settings Standard Network Configure MP Stapler Test Confidential Print Menu Standard USB Substitute Size Erase Temporary Data Files...
Page 133: Paper Menu
Understanding the printer menus Paper menu Default Source menu Default Source Set a default paper source for all print jobs. Tray [x] Notes: Multipurpose Feeder • Tray 1 (standard tray) is the factory default setting. Manual Paper • From the Paper menu, set Configure MP to "Cassette" for Multipurpose Manual Envelope Feeder to appear as a menu setting.
Page 134 Understanding the printer menus Tray [x] Type Specify the type of paper loaded in each tray. Plain Paper Notes: Card Stock • Plain Paper is the factory default setting for Tray 1. Custom Type [x] is Transparency the factory default setting for all other trays. Recycled •...
Page 135 Understanding the printer menus Multipurpose Feeder Type Specify the paper type loaded in the multipurpose feeder. Plain Paper Notes: Card Stock • Plain Paper is the factory default setting. Transparency • From the Paper menu, set Configure to “Cassette” for Multipurpose Recycled Feeder Type to appear as a menu.
Page 136: Configure Mp Menu
Understanding the printer menus Manual Paper Type Specify the paper type being manually loaded. Plain Paper Notes: Card Stock • Plain Paper is the factory default setting. Transparency • From the Paper menu, set Configure MP to “Manual” for Manual Paper Recycled Type to appear as a menu.
Page 137: Substitute Size Menu
Understanding the printer menus Substitute Size menu Substitute Size Substitute a specified paper size if the requested paper size is not available. Notes: Statement/A5 • All Listed is the factory default setting. All available substitutions are Letter/A4 allowed. All Listed •...
Page 138: Paper Weight Menu
Understanding the printer menus Rough Envelope Texture Specify the relative texture of the rough envelopes loaded. Rough Letterhead Texture Specify the relative texture of the letterhead loaded. Smooth Note: Normal is the factory default setting. Normal Rough Preprinted Texture Specify the relative texture of the preprinted paper loaded. Smooth Note: Normal is the factory default setting.
Page 139 Understanding the printer menus Transparency Weight Specify the relative weight of the transparencies loaded. Light Note: Normal is the factory default setting. Normal Heavy Recycled Weight Specify the relative weight of the recycled paper loaded. Light Note: Normal is the factory default setting. Normal Heavy Labels Weight...
Page 140: Paper Loading Menu
Understanding the printer menus Rough/Cotton Weight Specify the relative weight of the cotton or rough paper loaded. Light Note: Normal is the factory default setting. Normal Heavy Custom [x] Weight Specify the relative weight of the custom paper loaded. Light Notes: Normal •...
Page 141: Custom Types Menu
Understanding the printer menus Custom [x] Loading Determine and set two‑sided printing for all print jobs that specify Custom [x] as the paper type. Duplex Note: Custom [x] Loading is available only if the custom type is supported. Notes: • Duplex sets two‑sided printing as the default for all print jobs unless one‑sided printing is set from Printing Preferences or Print dialog.
Page 142: Custom Scan Sizes Menu
Understanding the printer menus Custom Scan Sizes menu Custom Scan Size [x] Specify a custom scan size name, size, and page orientation. Scan Size Name Notes: Width • 8.5 inches is the U.S. factory default setting for Width. 216 mm is the Height international factory default setting for Width.
Page 143 Understanding the printer menus Reports menu Menu Settings Page Print a report on the current printer menu settings. The report also contains information about the status of the supplies and a list of hardware options that are successfully installed. Device Statistics Print a report containing printer statistics, such as supply information and the number of printed pages.
Page 144: Active Nic Menu
Understanding the printer menus Print Directory Print a list of all the resources stored in an optional flash memory card or hard disk. Notes: • Job Buffer Size must be set to 100%. • Make sure that the memory card or hard disk is installed and working correctly.
Page 145 Understanding the printer menus NPA Mode Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol. Auto Notes: • Auto is the factory default setting. • The printer automatically restarts when the setting is changed from the control panel.
Page 146: Network Card Menu
Understanding the printer menus Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address. Network Card menu To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > Network Card •...
Page 147: Ipv6 Menu
Understanding the printer menus Gateway View or change the current TCP/IP gateway. Enable DHCP Specify the DHCP address and parameter assignment. Note: On is the factory default setting. Enable RARP Specify the RARP address assignment setting. Note: Off is the factory default setting. Enable BOOTP Specify the BOOTP address assignment setting.
Page 148: Wireless Menu
Understanding the printer menus Enable IPv6 Enable IPv6 in the printer. Note: On is the factory default setting. Auto Configuration Specify whether or not the network adapter accepts the automatic IPv6 address configuration entries provided by a router. Note: On is the factory default setting. Set Hostname Set the host name.
Page 149: Appletalk Menu
Understanding the printer menus Compatibility Specify the wireless standard for the wireless network. 802.11b/g Note: The 802.11b/g/n is the factory default setting. 802.11b/g/n Choose Network Select an available network for the printer to use. View Signal Quality View the quality of the wireless connection. View Security Mode View the encryption method for the wireless network.
Page 150 Understanding the printer menus PS SmartSwitch Set the printer to automatically switch to PS emulation when a print job received through a USB port requires it, regardless of the default printer language. Notes: • On is the factory default setting. •...
Page 151 Understanding the printer menus ENA Address Set the network address information for an external print server. yyy.yyy.yyy.yyy Note: This menu is available only when the printer is attached to an external print server through the USB port. ENA Netmask Set the netmask information for an external print server. yyy.yyy.yyy.yyy Note: This menu is available only when the printer is attached to an external print server through the USB port.
Page 152 Understanding the printer menus Parallel Buffer Set the size of the parallel input buffer. Disabled Notes: Auto • Auto is the factory default setting. 3K to [maximum size allowed] • Disabled turns off job buffering. Any print jobs already buffered on the printer hard disk are printed before normal processing resumes.
Page 153 Understanding the printer menus Mac Binary PS Set the printer to process Macintosh binary PostScript print jobs. Notes: • Auto is the factory default setting. Auto • Off filters print jobs using the standard protocol. • On processes raw binary PostScript print jobs. ENA Address Set the network address information for an external print server.
Page 154 Understanding the printer menus NPA Mode Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol. Notes: Auto • Auto is the factory default setting. Auto sets the printer to examine data, determine the format, and then processes it appropriately.
Page 155: Smtp Setup Menu
Understanding the printer menus Robust XON Determine whether the printer communicates availability to the computer. Notes: • Off is the factory default setting. • This menu item applies only to the serial port if Serial Protocol is set to XON/XOFF. Baud Specify the rate at which data can be received through the serial port.
Page 156: Security Menu
Understanding the printer menus SMTP Timeout Specify the amount of time in seconds before the server stops trying to send an e‑mail. 5–30 Note: 30 is the factory default setting. Reply Address Specify a reply address of up to 128 characters in the e-mail sent by the printer.
Page 157 Understanding the printer menus Edit Backup Password Create a backup password. Use Backup Password Notes: • • Off is the factory default setting for “Use Backup Password.” • • This menu appears only if a backup password exists. Password Edit Building Blocks Edit settings for Internal Accounts, NTLM, Simple Kerberos Setup, Kerberos Setup, Active Directory, LDAP, Password, and PIN.
Page 158: Miscellaneous Security Settings Menu
Understanding the printer menus Miscellaneous Security Settings menu Login Restrictions Limit the number and time frames of failed login attempts from the printer control panel before all users are locked out. Login failures Failure time frame Notes: Lockout time • “Login failures”...
Page 159: Confidential Print Menu
Understanding the printer menus Confidential Print menu Max Invalid PIN Set a limit on the number of times an invalid PIN can be entered. Notes: 2–10 • This menu item appears only when a formatted, working printer hard disk is installed. •...
Page 160: Security Audit Log Menu
Understanding the printer menus Automatic Method Mark all disk space used by a previous print job. This method does not permit the file system to reuse this space until it has been cleared. Single pass Multiple pass Notes: • “Single pass” is the factory default setting. •...
Page 161 Understanding the printer menus Configure Log (continued) Specify how audit logs are configured. Admin’s e-mail address Notes: [256 character string] • “Admin’s e‑mail address” determines if administrators are automatically Digitally sign exports notified of certain log events. This setting can have one or more e‑mail addresses (separated by commas).
Page 162 Understanding the printer menus Automatically Observe DST Set the printer to use the applicable daylight saving time (DST) start and end times associated with the printer Time Zone setting. Note: On is the factory default setting and uses the applicable Daylight Saving Time associated with the Time Zone setting.
Page 163: Settings Menu
Understanding the printer menus Settings menu General Settings menu Display Language Set the language of the text appearing on the display. English Note: Not all languages are available for all models. You may Francais need to install a special hardware for some languages. Deutsch Italiano Espanol...
Page 164 Understanding the printer menus Run Initial setup Run the setup wizard. Keyboard Specify a language and custom key information for the display keyboard. Keyboard Type English Francais Francais Canadien Deutsch Italiano Espanol Greek Dansk Norsk Nederlands Svenska Suomi Portugues Russian Polski Swiss German Swiss French...
Page 165 Understanding the printer menus Displayed Information Specify what is displayed on the upper corners of the home screen. Left side For Left side and Right side, select from the following options: Right side None Custom Text [x] IP Address Hostname Contact Name Location Date/Time...
Page 166 Understanding the printer menus Displayed Information (continued) Customize the displayed information for certain menus. Paper Jam Select from the following options: Load Paper Display Service Errors Message to display Default Alternate Default [text entry] Alternate [text entry] Notes: • No is the factory default setting for Display. •...
Page 167 Understanding the printer menus Screen Brightness Specify the brightness of the display. 20–100 Note: 100 is the factory default setting. One Page Copy Set copies from the scanner glass to only one page at a time. Note: Off is the factory default setting. Audio Feedback Specify the audio volume for the buttons.
Page 168 Understanding the printer menus Timeouts Set the amount of time before the printer enters a lower power state. Standby Mode Disabled Note: 15 minutes is the factory default setting. 1–240 Timeouts Set the amount of time in minutes the printer waits after a job is printed before it goes into a reduced power state.
Page 169 Understanding the printer menus Timeouts Set the amount of time in seconds the printer waits to receive an end-of-job message before canceling the rest of the job. Print Timeout Disabled Notes: 1–255 • 90 seconds is the factory default setting. •...
Page 170: Copy Settings Menu
Understanding the printer menus Print Recovery Set the printer to automatically check for jammed paper. Jam Assist Note: On is the factory default setting. Print Recovery Successfully print a page that may not have printed otherwise. Page Protect Notes: • Off is the factory default setting.
Page 171 Understanding the printer menus Content Source Specify how the original document was produced. Black/White Laser Note: Black/White Laser is the factory default setting. Color Laser Inkjet Photo/Film Magazine Newspaper Press Other Sides (Duplex) Specify whether an original document is two‑sided or one‑sided, and then specify whether the copy should be two‑sided or one‑sided.
Page 172 Understanding the printer menus Original Size Specify the size of the original document. Letter Note: Letter is the U.S. factory default setting. A4 is the international factory default Legal setting. Executive Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes JIS B5 Custom Scan Size [x] Book Original...
Page 173 Understanding the printer menus Header/Footer Specify the header or footer information and its location on the page. [Location] For the location, select from the following options: • Top left Date/Time • Top middle Page number • Top right Custom text •...
Page 174: Fax Settings Menu
Understanding the printer menus Color Dropout Specify which color to drop and to adjust the dropout setting for each color threshold. Color Dropout Notes: None • None is the factory default setting for Color Dropout. • 128 is the factory default setting for each color threshold. Green Blue Default Red Threshold...
Page 175 Understanding the printer menus General Fax Settings Restore Factory Defaults Restore the factory defaults of all fax settings. Optimize Fax Compatibility Optimize fax compatibility with other fax machines. Fax Name Specify the name of the fax in the printer. Fax Number Specify the number assigned to the fax.
Page 176 Understanding the printer menus Fax Cover Page Configure the fax cover page. Fax Cover Page Notes: Off by default • Off by default is the factory default setting for Fax Cover Page. On by default • Off is the factory default setting for all other menu items. Never use Always use Include to Field...
Page 177 Understanding the printer menus Original Size Specify the size of the original document. Letter Note: Mixed Sizes is the U.S. factory default setting. A4 is the international factory Legal default setting. Executive Tabloid Folio Statement Oficio (Mexico) Universal Auto Size Sense Mixed Sizes JIS B4 JIS B5...
Page 178 Understanding the printer menus Dialing Prefix Rules Establish a dialing prefix rule. Prefix Rule [x] Automatic Redial Specify the number of times the printer tries to send the fax to a specified number. 0–9 Note: 5 is the factory default setting. Redial frequency Specify the number of minutes between redials.
Page 179 Understanding the printer menus Background Removal Adjust the amount of background visible on a scanned image. ‑4 to 4 Note: 0 is the factory default setting. Color Balance Enable an equal balance of colors in the scanned image. Cyan - Red Magenta - Green Yellow - Blue Color Dropout...
Page 180 Understanding the printer menus Enable Color Fax Scans Enable color faxing. Off by default Note: Off by default is the factory default setting. On by default Never use Always use Auto Convert Color Faxes to Mono Convert all outgoing faxes to black and white. Faxes Note: On is the factory default setting.
Page 181 Understanding the printer menus Separator Sheets Enable the printer to include separator sheets for incoming fax jobs. Note: Off is the factory default setting. Before Job After Job Separator Sheet Source Specify the paper source for the separator sheet. Tray [x] Note: Tray 1 is the factory default setting.
Page 182 Understanding the printer menus Staple Specify whether prints are stapled. Notes: 1 staple • Off is the factory default setting. 2 staples • This menu item appears only when a staple finisher is installed. 4 staples Enable Color Fax Receive Enable the printer to receive fax in color and print it in grayscale.
Page 183 Understanding the printer menus Speaker Settings Speaker Mode Specify the mode of the speaker. Always Off Note: On until Connected is the factory default setting. A sound is issued until the On until Connected fax connection is made. Always On Speaker Volume Set the speaker volume to high or low.
Page 184 Understanding the printer menus Content Type Specify the content of the original document. Text Note: Text/Photo is the factory default setting. Graphics Text/Photo Photo Content Source Specify how the content was originally produced. Black/White Laser Note: Black/White Laser is the factory default setting. Color Laser Inkjet Photo/Film...
Page 185 Understanding the printer menus Use Multi‑Page TIFF Provide a choice between single‑page TIFF files and multiple‑page TIFF files. For a multiple-page scan‑to‑fax job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the scan job. Note: On is the factory default setting.
Page 186 Understanding the printer menus Format Specify the file format. PDF (.pdf) Note: PDF (.pdf) is the factory default setting. TIFF (.tif) JPEG (.jpg) XPS (.xps) RTF (.rtf) TXT (.txt) PDF Settings Configure the PDF settings. PDF Version Notes: 1.2–1.7 • 1.5 is the factory default setting for PDF Version.
Page 187 Understanding the printer menus Resolution Specify the resolution of the scan in dots per inch. 75 dpi Note: 150 dpi is the factory default setting. 150 dpi 200 dpi 300 dpi 400 dpi 600 dpi Darkness Lighten or darken the output. 1–9 Note: 5 is the factory default setting.
Page 188 Understanding the printer menus Text/Photo Default Set the quality of a text or photo image in relation to file size and the quality of the image. 5–90 Note: 75 is the factory default setting. Photo Default Set the quality of a photo image in relation to file size and the quality of the image. 5–90 Note: 50 is the factory default setting.
Page 189 Understanding the printer menus Background Removal Adjust the amount of background visible on a scanned image. ‑4 to 4 Note: 0 is the factory default setting. Color Balance Enable an equal balance of colors in the output. Cyan‑Red Magenta-Green Yellow-Blue Color Dropout Specify which color to drop and to adjust the dropout setting for each color threshold.
Page 190: Ftp Settings Menu
Understanding the printer menus Use cc:/bcc: Enable the use of the cc and bcc fields. Note: Off is the factory default setting. FTP Settings menu Format Specify the file format. PDF (.pdf) Note: PDF (.pdf) is the factory default setting. TIFF (.tif) JPEG (.jpg) XPS (.xps)
Page 191 Understanding the printer menus Color Specify whether the printer captures and transmits content in color. Note: On is the factory default setting. Resolution Specify the quality of the scan in dots per inch (dpi). 75 dpi Note: 150 dpi is the factory default setting. 150 dpi 200 dpi 300 dpi...
Page 192 Understanding the printer menus JPEG Quality Set the quality of a JPEG photo image in relation to the file size and quality of the image. Best for content 5–90 Notes: • Best for content is the factory default setting. • 5 reduces the file size, but the quality of the image is lessened.
Page 193 Understanding the printer menus Allow Save as Shortcut Enable shortcut creation for FTP addresses. Note: On is the factory default setting. Background Removal Adjust the amount of background visible on a copy. ‑4 to 4 Note: 0 is the factory default setting. Color Balance Enable an equal balance of colors in the output.
Page 194: Flash Drive Menu
Understanding the printer menus Temperature Enable the user to specify warm or cool outputs. Cool values generate a bluer output ‑4 to 4 than the default while warm values generate a redder output than the default. Note: 0 is the factory default setting. Flash Drive menu Scan Settings Format...
Page 195 Understanding the printer menus Content Source Specify how the original document was produced. Black/White Laser Note: Black/White Laser is the factory default setting. Color Laser Inkjet Photo/Film Magazine Newspaper Press Other Color Specify whether the printer captures and transmits content in color. Note: On is the factory default setting.
Page 196 Understanding the printer menus Sides (Duplex) Specify the orientation of the original documents loaded in the ADF for two-sided scanning. Long Edge Note: Off is the factory default setting. Short Edge JPEG Quality Set the quality of a JPEG photo image in relation to file size and quality. Best for content Notes: 5–90...
Page 197 Understanding the printer menus Color Dropout Specify which color to drop and to adjust the dropout setting for each color threshold. Color Dropout Notes: None • None is the factory default setting for Color Dropout. • 128 is the factory default setting for each color threshold. Green Blue Default Red Threshold...
Page 198 Understanding the printer menus Print Settings Copies Specify a default number of copies for each print job. 1–999 Note: 1 is the factory default setting. Paper Source Set a default paper source for all print jobs. Tray [x] Note: Tray 1 is the factory default setting. Multipurpose Feeder Manual Paper Manual Envelope...
Page 199 Understanding the printer menus Paper Saver Orientation Specify the orientation of a multiple‑page document. Auto Note: Auto is the factory default setting. Landscape Portrait Paper Saver Border Print a border on each page image. None Note: None is the factory default setting. Solid Separator Sheets Specify whether blank separator sheets are inserted.
Page 200: Setup Menu
Understanding the printer menus Recognized Languages Set the language or languages that the OCR can recognize. English For each language, select from the following options: French German Spanish Note: The language is enabled by default. If it is set to a value that is not in the list Italian of recognized languages, English is enabled by default.
Page 201 Understanding the printer menus Print Area Set the logical and physical printable area. Normal Notes: Whole Page • Normal is the factory default setting. When attempting to print data in the non‑printable area defined by the Normal setting, the printer clips the image at the boundary. •...
Page 202: Finishing Menu
Understanding the printer menus Finishing menu Sides (Duplex) Specify whether two‑sided printing is set as the default for all print jobs. 1 sided Notes: 2 sided • 1 sided is the factory default setting. • You can set two‑sided printing from the printer software. Duplex Binding Define the way two‑sided pages are bound and printed.
Page 203: Quality Menu
Understanding the printer menus Paper Saver Print multiple‑page images on one side of a paper. Notes: 2‑Up • Off is the factory default setting. 3‑Up • The number selected is the number of page images that print per side. 4‑Up 6‑Up 9‑Up 12‑Up...
Page 204: Job Accounting Menu
Understanding the printer menus Pixel Boost Enable more pixels to print in clusters for clarity, in order to enhance images horizontally or vertically, or to enhance fonts. Fonts Note: Off is the factory default setting. Horizontally Vertically Both directions Toner Darkness Lighten or darken the printed output.
Page 205 Understanding the printer menus Log Action at End of Frequency Determine and set how the printer responds when the frequency threshold expires. None Note: None is the factory default setting. E‑mail Current Log E‑mail & Delete Current Log Post Current Log Post &...
Page 206: Utilities Menu
Understanding the printer menus Utilities menu Remove Held Jobs Delete confidential and held jobs from the printer hard disk. Confidential Notes: Held • Selecting a setting affects only print jobs that are resident in the printer. Not Restored Bookmarks, print jobs on flash drives, and other types of held jobs are not affected.
Page 207: Postscript Menu
Understanding the printer menus XPS menu Print Error Pages Print a page containing information on errors, including XML markup errors. Note: Off is the factory default setting. PDF menu Scale to Fit Scale page content to fit the selected paper size. Note: No is the factory default setting.
Page 208: Pcl Emul Menu
Understanding the printer menus PCL Emul menu Font Source Specify the set of fonts used in the Font Name menu. Resident Notes: Disk • Resident is the factory default setting. It shows the factory default set of Download fonts downloaded in the RAM. Flash •...
Page 209 Understanding the printer menus PCL Emulation Settings Specify the number of lines that print on each page. Lines per Page Notes: 1–255 • 60 is the US factory default setting. 64 is the international default setting. • The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings.
Page 210: Html Menu
Understanding the printer menus Tray Renumber Display the factory default setting assigned to each tray, drawer, or feeder. View Factory Defaults MPF Default = 8 T1 Default = 1 T2 Default = 4 T3 Default = 5 T4 Default = 20 T5 Default = 21 Env Default = 6 MPaper Default = 2...
Page 211: Image Menu
Understanding the printer menus Font Size Set the default font size for HTML documents. 1–255 pt Notes: • 12 pt is the factory default setting. • Font size can be increased in 1‑point increments. Scale Scale the default font for HTML documents. 1–400% Notes: •...
Page 212: Help Menu
Understanding the printer menus Orientation Set the image orientation. Portrait Note: Portrait is the factory default setting. Landscape Reverse Portrait Reverse Landscape Help menu Menu item Description Print All Guides Prints all the guides Copy Guide Provides information about making copies and configuring the settings E‑mail Guide Provides information about sending e‑mails and configuring the settings Fax Guide...
Page 213: Saving Money And The Environment
Saving money and the environment Saving money and the environment Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide collection and recycling programs.
Page 214: Saving Energy
Saving money and the environment Check your first draft for accuracy Before printing or making multiple copies of a document: • Use the preview feature to see how the document looks like before you print it. • Print one copy of the document to check its content and format for accuracy. Avoid paper jams Correctly set the paper type and size to avoid paper jams.
Page 215: Adjusting Sleep Mode
Saving money and the environment Reduce printer noise. Notes: • Print jobs are processed at a reduced speed. • Printer engine motors do not start until a document is ready to print. There will be a short delay before the first page is printed. Use factory default settings.
Page 216: Using Schedule Power Modes
Saving money and the environment Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. Click Settings >...
Page 217: Recycling
The foam used in Lexmark packaging is recyclable where foam recycling facilities exist. Facilities may not exist in your area. When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in. Lexmark will recycle the box.
Page 218 Saving money and the environment To return Lexmark cartridges for reuse or recycling, follow the instructions that came with your printer or cartridge and use the prepaid shipping label. You can also do the following: Go to www.lexmark.com/recycle. From the Toner Cartridges section, select your country or region.
Page 219: Securing The Printer
Securing the printer Securing the printer Statement of Volatility Your printer contains various types of memory that can store device and network settings, and user data. Types of memory Description Volatile memory Your printer uses standard Random Access Memory (RAM) to temporarily buffer user data during simple print and copy jobs.
Page 220: Erasing Non‑Volatile Memory
Securing the printer Erasing non‑volatile memory • Individual settings, device and network settings, security settings, and embedded solutions—Erase information and settings by selecting Wipe All Settings in the Configuration menu. • Fax data—Erase fax settings and data by selecting Wipe All Settings in the Configuration menu. Turn off the printer.
Page 221: Configuring Printer Hard Disk Encryption
Securing the printer • Disk wiping can take from several minutes to more than an hour, during which the printer will be unavailable for other user tasks. Touch Back > Exit Config Menu. The printer will perform a power‑on reset, and then return to normal operating mode. Configuring printer hard disk encryption Enable hard disk encryption to prevent loss of sensitive data in the event the printer or its hard disk is stolen.
Page 222: Finding Printer Security Information
In high-security environments, it may be necessary to take additional steps to make sure that confidential data stored in the printer cannot be accessed by unauthorized persons. For more information, go to the Lexmark security Web page or see the Embedded Web Server—Security: Administrator’s Guide at http://support.lexmark.com.
Page 223: Maintaining The Printer
Maintaining the printer Maintaining the printer Warning—Potential Damage: Failure to maintain optimum printer performance, or to replace parts and supplies, may cause damage to your printer. Cleaning printer parts Cleaning the printer Note: You may need to perform this task after every few months. Warning—Potential Damage: Damage to the printer caused by improper handling is not covered by the printer warranty.
Page 224: Cleaning The Scanner Glass
Maintaining the printer Cleaning the scanner glass Clean the scanner glass if you encounter print quality problems, such as streaks on copied or scanned images. Slightly dampen a soft, lint-free cloth or paper towel with water. Open the scanner cover. Clean all the areas shown, and then let them dry.
Page 225: Checking The Status Of Parts And Supplies
Using genuine Lexmark parts and supplies Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components. Use of third-party supplies or parts can affect warranty coverage.
Page 226: Ordering An Imaging Unit
Maintaining the printer Ordering an imaging unit Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of toner from toner cartridge. For more information on replacing the imaging unit, see the instruction sheet that came with the supply. Part name Part number Imaging unit...
Page 227: Storing Supplies
Maintaining the printer The accuracy of the estimated number of remaining pages may decrease when the actual printing consumption is different from the historical printing consumption. Consider the variable level of accuracy before purchasing or replacing supplies based on the estimate. Until an adequate print history is obtained on the printer, the estimated cartridge yield is based on approximately 5% coverage per page.
Page 228 Maintaining the printer Pull the toner cartridge out using the handle. Unpack the toner cartridge, and then remove all packing materials. Shake the new cartridge to redistribute the toner. Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer.
Page 229: Replacing The Imaging Unit
Maintaining the printer Replacing the imaging unit Press the button on the right side of the printer, and then open the front door. Pull the toner cartridge out using the handle. Lift the green handle, and then pull the imaging unit out of the printer.
Page 230 Maintaining the printer Unpack the new imaging unit, and then shake it. Remove all packing materials from the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. Warning—Potential Damage: Do not touch the photoconductor drum.
Page 231: Replacing The Staple Cartridge
Maintaining the printer Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer. Close the front door. Replacing the staple cartridge Open the stapler door.
Page 232 Maintaining the printer Pull out the staple cartridge from the finisher. Hold both sides of the empty staple case with your fingers, pull, and then lift the empty staple case from the cartridge. Remove the spare staple case from its holder. Insert the spare staple case into the staple cartridge.
Page 233: Moving The Printer
Maintaining the printer Push the staple cartridge into the finisher until it clicks into place. Replace the spare staple case for future use. Close the stapler door. Moving the printer Before moving the printer CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely.
Page 234: Moving The Printer To Another Location
Maintaining the printer • If an optional tray is installed, then remove it from the printer. To remove the optional tray, slide the latch on the right side of the tray toward the front of the tray until it clicks into place. •...
Page 235: Managing The Printer
This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced system support tasks, see the Networking Guide on the Software CD or the Embedded Web Server Administrator's Guide at http://support.lexmark.com. Checking the virtual display Open a Web browser, and then type the printer IP address in the address field.
Page 236: Configuring Supply Notifications From The Embedded Web Server
Managing the printer Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. Click Reports, and then click the type of report you want to view.
Page 237: Restoring Factory Default Settings
Managing the printer Restoring factory default settings If you want to keep a list of the current menu settings for reference, then print a menu settings page before restoring the factory default settings. For more information, see “Printing a menu settings page” on page If you want a more comprehensive method of restoring the printer factory default settings, then perform the Wipe All Settings option.
Page 238: Clearing Jams
Clearing jams Clearing jams Avoiding jams Load paper properly • Make sure paper lies flat in the tray. Correct loading of paper Incorrect loading of paper • Do not remove a tray while the printer is printing. • Do not load a tray while the printer is printing. Load it before printing, or wait for a prompt to load it. •...
Page 239: Understanding Jam Messages And Locations
Clearing jams Use recommended paper • Use only recommended paper or specialty media. • Do not load wrinkled, creased, damp, bent, or curled paper. • Flex, fan, and straighten paper before loading it. • Do not use paper that has been cut or trimmed by hand. •...
Page 240: X]‑Page Jam, Open Automatic Feeder Top Cover. [28Y.xx]
Clearing jams Jam access area Printer control panel message What to do Front door [x]‑page jam, open front Open the front door, then remove the toner cartridge and door. [20y.xx] imaging unit, and then the jammed paper. Multipurpose [x]‑page jam, clear manual Remove all paper from the multipurpose feeder, and then feeder feeder.
Page 241: X]‑Page Jam, Clear Standard Bin. [20Y.xx]
Clearing jams Straighten the edges of the original documents, then load the documents into the ADF, and then adjust the paper guide. From the printer control panel, touch Done to clear the message and continue printing. [x]‑page jam, clear standard bin. [20y.xx] Firmly grasp the jammed paper on each side, and then gently pull it out.
Page 242 Clearing jams Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. Close the front and rear door. From the printer control panel, select Done to clear the message and continue printing.
Page 243: X]‑Page Jam, Open Front Door. [20Y.xx]
Clearing jams [x]‑page jam, open front door. [20y.xx] CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it. Press the button on the right side of the printer, and then open the front door. Pull out the toner cartridge using the handle.
Page 244 Clearing jams Lift the green handle, and then pull out the imaging unit from the printer. Warning—Potential Damage: Do not touch the shiny blue photoconductor drum under the imaging unit. Doing so may affect the quality of future print jobs. Place the imaging unit aside on a flat, smooth surface.
Page 245 Clearing jams Note: Make sure all paper fragments are removed. Insert the imaging unit by aligning the arrows on the side rails of the unit with the arrows on the side rails inside the printer, and then insert the imaging unit into the printer. Insert the toner cartridge by aligning the side rails of the cartridge with the arrows on the side rails inside the printer, and then insert the cartridge into the printer.
Page 246: X]‑Page Jam, Remove Tray 1 To Clear Duplex. [23Y.xx]
Clearing jams Close the front door. From the printer control panel, select Continue to clear the message and continue printing. [x]‑page jam, remove tray 1 to clear duplex. [23y.xx] Pull out the tray completely. Locate the lever, and then pull it down to release the jam. Firmly grasp the jammed paper on each side, and then gently pull it out.
Page 247: X]‑Page Jam, Clear Manual Feeder. [25Y.xx]
Clearing jams Insert the tray. From the printer control panel, touch Done to clear the message and continue printing. [x]‑page jam, clear manual feeder. [25y.xx] From the multipurpose feeder, firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed.
Page 248: X]‑Page Jam, Open Tray [X]. [24Y.xx]
Clearing jams Reload paper into the multipurpose feeder. Note: Make sure the paper guide lightly rests against the edge of the paper. From the printer control panel, touch Done to clear the message and continue printing. [x]‑page jam, open tray [x]. [24y.xx] Pull out the tray completely.
Page 249: X]-Page Jam, Remove All Pages From The Output Bin. Leave Paper In Bin. [45Y.xx]
Clearing jams Insert the tray. From the printer control panel, touch Done to clear the message and continue printing. [x]-page jam, remove all pages from the output bin. Leave paper in bin. [45y.xx] Paper jam in the finisher bin Empty the standard bin. Move the paper guides to the sides.
Page 250 Clearing jams Remove all jammed pages from inside the access areas. Note: Make sure all paper fragments are removed. If necessary, touch Done from the printer control panel to clear the message and continue printing. Paper jam in the finisher rear door Open the finisher rear door.
Page 251 Clearing jams Open the finisher narrow door, and then remove any paper fragments inside the narrow door. Close the narrow door.
Page 252 Clearing jams Close the finisher rear door. If necessary, touch Done from the printer control panel to clear the message and continue printing. Staple jam in the finisher Open the staple access door. Pull out the staple cartridge from the finisher.
Page 253 Clearing jams Lift the staple guard, and then remove any jammed or loose staples. Press down the staple guard until it clicks into place. Insert staple cartridge back into the finisher until it clicks into place.
Page 254 Clearing jams Close the staple access door. If necessary, touch Done from the printer control panel to clear the message and continue printing.
Page 255: Troubleshooting
Troubleshooting Troubleshooting Understanding the printer messages Cartridge low [88.xy] You may need to order a replacement toner cartridge. If necessary, touch Continue on the printer control panel to clear the message and continue printing. Cartridge nearly low [88.xy] If necessary, touch Continue on the printer control panel to clear the message and continue printing. Cartridge very low, [x] estimated pages remain [88.xy] You may need to replace the toner cartridge very soon.
Page 256: Close Front Door
Troubleshooting Change [paper source] to [paper type] [paper size] load [orientation] Try one or more of the following: • Load the correct size and type of paper in the tray or feeder, specify the paper size and type in the Paper menu on the printer control panel, and then touch Finished changing paper.
Page 257 Troubleshooting Close flatbed cover and load originals if restarting job [2yy.xx] Try one or more of the following: • Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan job. • Touch Scan from flatbed to continue scanning from the scanner glass immediately after the last successful scan job.
Page 258: Disk Must Be Formatted For Use In This Device
Troubleshooting Disk must be formatted for use in this device From the printer control panel, touch Format disk to format the printer hard disk and clear the message. Note: Formatting deletes all the files stored in the printer hard disk. Disk near full.
Page 259 Troubleshooting Fax Station Number not set up. Contact system administrator. Try one or more of the following: • From the printer control panel, touch Continue to clear the message. • Complete the Analog Fax setup. If the message appears again after completing the setup, then contact your system support person.
Page 260 Troubleshooting Insufficient memory to collate job [37] Try one or more of the following: • From the printer control panel, touch Continue to print the part of the job already stored and begin collating the rest of the print job. •...
Page 261 Troubleshooting Load [paper source] with [custom string] [paper orientation] Try one or more of the following: • Load the indicated tray or feeder with the correct size and type of paper. • To use the tray with the correct paper size or type, touch Finished loading paper on the printer control panel. Note: If the printer finds a tray that has the correct paper size and type, then it feeds from that tray.
Page 262 If necessary, touch Continue to clear the message and continue printing. Maintenance kit very low, [x] estimated pages remain [80.xy] You may need to replace the maintenance kit very soon. For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact customer support, and then report the message.
Page 263 Turn off the printer, wait for about 10 seconds, and then turn the printer back on. • Update the network firmware in the printer or print server. For more information, visit the Lexmark support Web site at http://support.lexmark.com. No analog phone line connected to modem, fax is disabled.
Page 264: Paper Changes Needed
If you do not wish to accept these risks, then remove the third-party supply or part from your printer, and then install a genuine Lexmark supply or part. Note: For the list of supported supplies, see the “Ordering supplies” section of the User's Guide or visit www.lexmark.com.
Page 265: Replace All Originals If Restarting Job
Note: If you do not have a replacement imaging unit, then see the “Ordering supplies” section of the User’s Guide or visit www.lexmark.com. Replace maintenance kit, 0 estimated pages remain [80.xy] The printer is scheduled for maintenance. For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact your service representative, and then report the message.
Page 266: Restore Held Jobs
Guide. Note: If you do not have a replacement cartridge, then see the “Ordering supplies” section of the User’s Guide or visit www.lexmark.com. Replace unsupported imaging unit [32.xy] Remove the imaging unit, and then install a supported one to clear the message and continue printing. For more information, see the instruction sheet that came with the supply or see the “Replacing supplies”...
Page 267: Some Held Jobs Were Not Restored
• Turn off the printer, and then turn it back on. • Update the network firmware in the printer or print server. For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact customer support, and then report the message.
Page 268: Supply Needed To Complete Job
Troubleshooting Standard USB port disabled [56] Try one or more of the following: • From the printer control panel, touch Continue to clear the message. • Enable the USB port. From the printer control panel, navigate to: Network/Ports > USB Buffer > Auto Note: The printer discards any data received through the USB port.
Page 269: Solving Printer Problems
Troubleshooting Unsupported option in slot [x] [55] Turn off the printer. Unplug the power cord from the electrical outlet. Remove the unsupported option card from the printer controller board, and then replace it with a supported card. Connect the power cord to a properly grounded electrical outlet. Turn the printer back on.
Page 270 Troubleshooting Action Step 3 Go to step 4. Plug one end of the power cord into the Check if one end of the power cord is plugged into the printer and the printer and the other to other to a properly grounded electrical outlet. a properly grounded electrical outlet.
Page 271: Printer Display Is Blank
Troubleshooting Action Step 10 Go to step 11. Use correct printer driver settings. Check if you have selected the correct port settings in the printer driver. Are the port settings correct? Step 11 Go to step 12. Install the correct printer driver.
Page 272: Option Problems
Troubleshooting Option problems Cannot detect internal option Action Step 1 The problem is solved. Go to step 2. Turn off the printer, then wait for about 10 seconds, and then turn on the printer. Does the internal option operate correctly? Step 2 Go to step 3.
Page 273 Troubleshooting Tray problems Action Step 1 The problem is solved. Go to step 2. Pull out the tray, and then do one or more of the following: • Check for paper jams or misfeeds. • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray.
Page 274: Internal Solutions Port Does Not Operate Correctly
Troubleshooting Cannot detect memory card Action Make sure the memory card is installed. The problem is solved. Contact customer support. Install the memory card. For more information, see “Installing a memory card” on page Note: Check if the memory card is securely connected to the printer controller board.
Page 275: Paper Feed Problems
Troubleshooting Action Step 2 The problem is solved. Contact customer support. Check the cable and the USB or parallel interface card connection. Use the correct cable, and then make sure it is securely connected to the USB or parallel interface card. Does the USB or parallel interface card operate correctly? Paper feed problems Paper frequently jams...
Page 276: Jammed Pages Are Not Reprinted
Troubleshooting Paper jam message remains after jam is cleared Action Check the entire paper path for jammed paper. Contact customer The problem is solved. support. Remove any jammed paper. From the printer control panel, touch Continue to clear the message. Does the paper jam message remain? Jammed pages are not reprinted Action...
Page 277: Print Jobs Do Not Print
Troubleshooting Error message about reading the flash drive appears Action Step 1 Go to step 2. Insert the flash drive into the front USB port. Check if the flash drive is inserted into the front USB port. Note: The flash drive will not work if it is inserted into the rear USB port.
Page 278 Step 6 The problem is solved. Contact customer support. Remove, and then reinstall the printer software. For more information, see “Installing the printer” on page Note: The printer software is available at http://support.lexmark.com. Resend the print job. Do the jobs print?
Page 279: Confidential And Other Held Jobs Do Not Print
Troubleshooting Confidential and other held jobs do not print Note: Confidential, Verify, Reserve, and Repeat print jobs may be deleted if the printer requires extra memory to process additional held jobs. Action Step 1 Go to step 2. Select one of the Print and Hold options, and Open the held jobs folder on the printer display, and then verify that your then resend the print...
Page 280: Print Job Takes Longer Than Expected
Troubleshooting Print job takes longer than expected Action Step 1 The problem is solved. Go to step 2. Change the environmental settings of the printer. From the printer control panel, navigate to: > Settings > General Settings Select Eco‑Mode or Quiet Mode, and then select Off. Note: Disabling Eco-Mode or Quiet Mode may increase the consumption of energy or supplies, or both.
Page 281: Job Prints From The Wrong Tray Or On The Wrong Paper
Troubleshooting Job prints from the wrong tray or on the wrong paper Action Step 1 The problem is solved. Go to step 2. Check if you are printing on paper that is supported by the tray. Resend the print job. Did the job print from the correct tray or on the correct paper? Step 2 The problem is solved.
Page 282: Tray Linking Does Not Work
Troubleshooting Tray linking does not work Notes: • The trays can detect paper length. • The multipurpose feeder does not automatically detect the paper size. You must set the size from the Paper Size/Type menu. Action Step 1 The problem is solved. Go to step 2. Open the trays, and then check if they contain paper of the same size and type.
Page 283: Unexpected Page Breaks Occur
Troubleshooting Action Step 3 The problem is solved. Contact customer support. Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of images, and the number of pages in the job. Did the job print and collate correctly? Unexpected page breaks occur Action...
Page 284: Printer Is Printing Blank Pages
Troubleshooting Action Step 2 Contact customer The problem is solved. support. Use a font that is supported by the printer or install the font that you want to use on your computer. For more information, contact your system support person. Resend the print job.
Page 285 Troubleshooting Action Step 3 Contact customer The problem is solved. support. Replace the imaging unit, and then resend the print job. Is the printer still printing blank pages? Clipped pages or images Leading edge ABCDE ABCDE ABCDE Trailing edge Action Step 1 Go to step 2.
Page 286: Prints On Color Transparencies Appear Dark When Projected
Troubleshooting Action Step 4 Contact customer The problem is solved. support. Reinstall the imaging unit. Remove the toner cartridge. Remove the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.
Page 287: Gray Background On Prints
Troubleshooting Action Step 1 Go to step 2. Load paper with the correct paper type and Load paper with the correct paper type and weight in the tray. weight in the tray. Is paper with the correct paper type and weight loaded in the tray? Step 2 Go to step 3.
Page 288: Incorrect Margins On Prints
Troubleshooting Action Step 2 The problem is solved. Go to step 3. Adjust the toner darkness to a lighter setting. From the Quality Menu, select a lower value to reduce toner density. • 4 is the factory default setting. • If Print Mode is set to Black Only, then a setting of 5 increases toner density and darkness for all print jobs.
Page 289: Paper Curl
Troubleshooting Action Step 2 Go to step 3. Do one or more of the following: From the printer control panel, set the paper size in the Paper menu to match the paper loaded in the tray. • Specify the paper size from the tray settings to match Does the paper size match the paper loaded in the tray?
Page 290: Print Irregularities
Troubleshooting Action Step 5 Contact customer The problem is solved. support. Load paper from a fresh package. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. Resend the print job. Is the paper still curled? Print irregularities Leading edge ABCDE...
Page 291: Repeating Defects Appear On Prints
Troubleshooting Action Step 5 Go to step 6. The problem is solved. Load paper from a fresh package. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. Resend the print job. Do print irregularities still appear? Step 6 Contact...
Page 292: Print Is Too Dark
Troubleshooting Print is too dark Action Step 1 Go to step 2. The problem is solved. From the Quality menu on the printer control panel, reduce the toner darkness. Note: 8 is the factory default setting. Resend the print job. Is the print still too dark? Step 2 Go to step 3.
Page 293: Print Is Too Light
Troubleshooting Action Step 5 Go to step 6. The problem is solved. Load paper from a fresh package. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. Resend the print job. Is the print still too dark? Step 6 Contact...
Page 294: Skewed Print
Troubleshooting Action Step 4 From the printer Go to step 5. control panel, change Make sure that the paper has no texture or rough finishes. the texture settings in the Paper Texture Are you printing on textured or rough paper? menu to match the paper you are printing Step 5...
Page 295: Printer Is Printing Solid Black Pages
Troubleshooting Action Step 1 Go to step 2. The problem is solved. Move the width and length guides in the tray to the correct positions for the size of the paper loaded. Resend the print job. Is the print still skewed? Step 2 Contact customer...
Page 296: Transparency Print Quality Is Poor
Troubleshooting Transparency print quality is poor Action Step 1 Go to step 2. Set the paper type to Transparency. From the printer control panel, set the paper type in the Paper menu to match the paper loaded in the tray. Is the paper type for the tray set to Transparency? Step 2 Contact...
Page 297: Streaked Vertical Lines Appear On Prints
Troubleshooting Action Step 4 Go to step 5. The problem is solved. Reinstall the imaging unit. Remove the toner cartridge, and then the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.
Page 298: Horizontal Voids Appear On Prints
Troubleshooting Action Step 3 Go to step 4. The problem is solved. Load paper from a fresh package. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. Resend the print job. Do streaked vertical lines appear on prints? Step 4 Go to step 5.
Page 299: Vertical Voids Appear On Prints
Troubleshooting Action Step 3 Go to step 4. The problem is solved. Redistribute the toner in the imaging unit. Remove the toner cartridge, and then the imaging unit. Firmly shake the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes.
Page 300: Toner Specks Appear On Prints
Troubleshooting Action Step 4 Go to step 5. The problem is solved. Redistribute the toner in the imaging unit. Remove the toner cartridge, and then the imaging unit. Firmly shake the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes.
Page 301: Toner Rubs Off
Troubleshooting Action Step 2 Contact customer The problem is solved. support Replace the imaging unit, and then resend the print job. http://support.lexmar k.com or your service Does fog or shading appear on prints? representative. Toner rubs off Leading edge Trailing edge Action Step 1 Go to step 2.
Page 302: Solving Copy Problems
Troubleshooting Solving copy problems • “Copier does not respond” on page 302 • “Scanner unit does not close” on page 302 • “Poor copy quality” on page 303 • “Partial document or photo copies” on page 304 Copier does not respond Action Step 1 Clear the error or status...
Page 303: Poor Copy Quality
Troubleshooting Poor copy quality Action Step 1 Clear the error or status Go to step 2. message. Check if an error or status message appears on the display. Does an error or status message appear? Step 2 Go to step 3. Increase the scan resolution setting for a Check the quality of the original document.
Page 304: Partial Document Or Photo Copies
Troubleshooting Action Step 8 Go to step 9. The problem is solved. Check for patterns on print. From the Copy screen, navigate to: Advanced Options > Advanced Imaging > Sharpness > select a lower setting On the Copy screen, make sure no scaling is being selected. Do patterns appear on prints? Step 9 Go to step 10.
Page 305: Solving Fax Problems
Troubleshooting Action Step 2 Go to step 3. Change the paper size setting to match the Check if the paper size setting matches the size of the paper loaded in the paper loaded in the tray. tray, or load the tray From the Paper menu on the printer control panel, check the Paper with paper that Size setting.
Page 306: Caller Id Is Not Shown
Troubleshooting Caller ID is not shown Action Contact your telephone company to check if your telephone line is The problem is solved. Contact customer subscribed to the caller ID service. support. Notes: • If your region supports multiple caller ID patterns, then you may have to change the default setting.
Page 307 Troubleshooting Action Step 5 The problem is solved. Go to step 6. Check the telephone wall jack. Plug the telephone cable into the wall jack. Listen for a dial tone. If you do not hear a dial tone, then plug a different telephone cable into the wall jack.
Page 308: Can Send But Not Receive Faxes
Troubleshooting Action Step 8 The problem is solved. Go to step 9. Temporarily disconnect other equipment (such as answering machines, computers with modems, or telephone line splitters) between the printer and the telephone line, and then try sending or receiving a fax. Can you send or receive a fax? Step 9 The problem is solved.
Page 309: Can Receive But Not Send Faxes
Troubleshooting Action Step 2 The problem is solved. Go to step 3. Check the ring count delay settings. Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
Page 310: Received Fax Has Poor Print Quality
Troubleshooting Action Step 3 The problem is solved. Contact customer support. Set up the shortcut number properly. • Check if the shortcut number has been set for the telephone number that you want to dial. • Dial the telephone number manually. Can you send faxes? Received fax has poor print quality Action...
Page 311: Solving Scanner Problems
Troubleshooting Action Step 3 The problem is solved. Contact customer support. Replace the toner cartridge. When Cartridge low [88.xy] appears, replace the cartridge, and then resend the fax. Is the fax print quality satisfactory? Solving scanner problems • “The scanner does not respond” on page 311 •...
Page 312 Troubleshooting Action Step 5 Connect the printer Go to step 6. power cord directly to Check if the printer is plugged into any surge protectors, uninterruptible a properly grounded power supplies, or extension cords. electrical outlet. Is the printer plugged into any surge protectors, uninterruptible power supplies, or extension cords? Step 6 Unplug the other...
Page 313: Scanning Takes Too Long Or Freezes The Computer
Troubleshooting Action Step 5 The problem is solved. Go to step 6. From the Flash Drive menu, reduce the scan resolution settings, and then resend the scan job. Does the job scan? Step 6 The problem is solved. Change the Content Type and Content Check the scan settings.
Page 314: Poor Scanned Image Quality
Troubleshooting Poor scanned image quality Action Step 1 Clear the error Go to step 2. message. Check if an error message appears on the display. Is there an error message on the printer display? Step 2 Go to step 3. Increase the scan resolution settings for a Check the quality of the original document.
Page 315: Partial Document Or Photo Scans
Troubleshooting Partial document or photo scans Action Check the placement of the document or photo. Contact customer Load the document or support. photo facedown on the Make sure the document or photo is loaded facedown on the scanner scanner glass in the glass in the upper left corner.
Page 316: Solving Home Screen Application Problems
Troubleshooting Solving home screen application problems An application error has occurred Action Step 1 Go to step 2. Contact customer support. Check the system log for relevant details. Open a Web browser, and then type the printer IP address in the address field.
Page 317: Contacting Customer Support
You need to know your printer model type and serial number. For more information, see the label at the back of the printer. The serial number is also listed on the menu settings page. Lexmark has various ways to help you solve your printing problem. Visit the Lexmark Web site at http://support.lexmark.com, and then select one of the following: Tech Library You can browse our library of manuals, support documentation, drivers, and other downloads to help you solve common problems.
Page 318: Notices
The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Page 319: Noise Emission Levels
Note: To assure compliance with FCC regulations on electromagnetic interference for a Class B computing device, use a properly shielded and grounded cable such as Lexmark part number 1021231 for parallel attach or 1021294 for USB attach. Use of a substitute cable not properly shielded and grounded may result in a violation of FCC regulations.
Page 320: Temperature Information
The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products. If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.
Page 321: Static Sensitivity Notice
ENERGY STAR Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.
Page 322: Power Consumption
The product is plugged into an electrical outlet, but the power switch is turned off. The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average. Values are subject to change. See www.lexmark.com for current values.
Page 323: Hibernate Mode
Notices Sleep Mode This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout. Factory default Sleep Mode Timeout for this product (in minutes): By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 120 minutes.
Page 324 The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY.
Page 325: Notice To Users Of The Canadian Telephone Network
If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. If you experience trouble with this equipment, for repair or warranty information, contact Lexmark International, Inc. www.lexmark.com or your Lexmark representative.
Page 326: Notice To Users Of The New Zealand Telephone Network
Notices Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem. It is recommended that the customer install an appropriate AC surge arrestor in the AC outlet to which this device is connected.
Page 327: Using This Product In Switzerland
Using this product in Switzerland This product requires a Swiss billing tone filter (Lexmark part number 80D1877) to be installed on any line which receives metering pulses in Switzerland. The filter must be used, as metering pulses are present on all analog telephone lines in Switzerland.
Page 328: Regulatory Notices For Wireless Products
Notices Compliance is indicated by the CE marking. The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.
Page 329: Taiwan Ncc Rf Notice Statement
Compliance is indicated by the CE marking. The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY.
Page 330 Operation is allowed in all EU and EFTA countries, but is restricted to indoor use only. The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY.
Page 331 —Is manufactured from new parts, or new and serviceable used parts, which perform like new parts —Is, during normal use, free from defects in material and workmanship If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).
Page 332 Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.
Page 333: Limitation Of Liability
ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.
Page 334 Notices The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for IKE and IKEv2 Authentication Using the Eliptic Curve Digital Signature Algorithm (ECDSA) implemented in the product or service. The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp.
Page 335: Index
Index Index advanced options, touch‑screen changing output file type Numerics e‑mail 101 e‑mailing 98 250‑sheet tray answering machine Check tray [x] connection 256 installing 43 setting up 104 checking an unresponsive 550‑sheet tray AppleTalk menu 149 printer 269 installing 43 applications checking status of parts and home screen 22...
Page 336 Index supply notifications, maintenance copy quality creating profiles kit 236 adjusting 89 using the ScanBack Utility 129 supply notifications, toner copy screen custom name cartridge 236 content source 94 configuring 65 configuring e‑mail settings 95 content type 94 Custom Names menu 141 configuring port settings 51 options 93 custom paper type name...
Page 337 Index erasing volatile memory 219 using a shortcut number 97 Error reading USB drive. Remove using the address book 98 Eco‑Mode setting 214 USB. 258 using the printer control panel 97 Edit Security Setups menu 156 Error reading USB hub. Remove Embedded Web Server hub.
Page 338 Index can send but not receive FTP address showing 21 faxes 308 creating shortcuts using the Image menu 211 cannot send or receive a fax 306 printer control panel 125 imaging unit received fax has poor print FTP address, scanning to ordering 226 quality 310 using a shortcut number 126...
Page 339 Index Network Card 146 Network Reports 145 jams maintenance kit OCR Settings 199 accessing 239 ordering 226 Paper Loading 140 avoiding 238 Maintenance kit low [80.xy] 262 Paper Size/Type 133 understanding messages 239 Maintenance kit nearly low Paper Texture 137 jams, clearing [80.xy] 262 Paper Weight 138...
Page 340 263 Parallel [x] menu 151 fax options 123 noise emission levels 319 Parallel port [x] disabled [56] 264 scan options 131 Non‑Lexmark [supply type], see parts paper User’s Guide [33.xy] 263 checking status 225 characteristics 69 non‑volatile memory 219...
Page 341 Index streaked horizontal lines appear printer hard disk Close rear door 256 on prints 296 disposing of 219 Complex page, some data may not streaked vertical lines 297 encrypting 221 have printed [39] 257 toner fog or background installing 39 Configuration change, some held shading 300 removing 42...
Page 342 Standard USB port disabled where to find 9 to modem, fax is disabled. 263 [56] 268 Push Button Configuration method Non‑Lexmark [supply type], see Supply needed to complete using 50 User’s Guide [33.xy] 263 job 268 Not enough free space in flash...
Page 343 Index Reinstall missing or unresponsive restoring factory default Scanner disabled. Contact system cartridge [31.xy] 265 settings 237 administrator if problem persists. Reinstall missing or unresponsive RJ‑11 adapter 111 [840.02] 267 imaging unit [31.xy] 266 scanner glass Remote Operator Panel cleaning 224 setting up 25 copying using 85 safety information 7, 8...
Page 344 213 Server 316 fax destination 118, 119 storing 227 checking an unresponsive FTP address 125 using genuine Lexmark 225 printer 269 FTP destination 125 using recycled paper 213 contacting customer support 317 showing icons on the home supplies, ordering fax and e‑mail functions are not...
Page 345 Index scanner unit does not skewed print 294 using Forms and Favorites 77 close 302, 313 streaked horizontal lines appear using Hibernate mode 215 troubleshooting, display on prints 296 using recycled paper 213 printer display is blank 271 streaked vertical lines 297 using Schedule Power Modes 216 troubleshooting, fax toner fog or background...
Page 346 Index XPS menu 207...

Lexmark XM3150 User Manual

Safety Information

Learning about the Printer

Understanding the Printer Control Panel

Setting up and Using the Home Screen Applications

Additional Printer Setup

Loading Paper and Specialty Media

Paper and Specialty Media Guide

Printing

Copying

E-Mailing

Faxing

Scanning

Understanding the Printer Menus

Saving Money and the Environment

Securing the Printer

Maintaining the Printer

Managing the Printer

Clearing Jams

Troubleshooting

Notices

Index

Quick Links

Need help?

Questions and answers

Related Manuals for Lexmark XM3150

Summary of Contents for Lexmark XM3150