Using The Barcomed Hardware Tab - Barco MGP 15 Dicom Theater Hardware & Software Installation & User Manual

BarcoMed Hardware Tab
Table 1:
AURA
Controllers
BarcoMed 3MP2FH
BarcoMed 5MP1HM
BarcoMed
5MP2 AURA
BarcoMed
Coronis 5MP
BarcoMed 5MP2F
BarcoMed 5MP2FH

Using The BarcoMed Hardware Tab

To access the BarcoMed Hardware Tab do the following:
1. Open the "Display Properties Control Panel" by right clicking
on the desktop, then select "Properties".
2. Click on the "Settings" tab. Double click on the rectangle
that represents one of the heads of the BarcoMed Display
Controller you are working with to bring up its properties
page. Click on the "BarcoMed Hardware Tab" (see figure 22
on page 57).
56
Non-AURA
Controllers
BarcoMed 5MP1H
BarcoMed 5MP2
BarcoMed
Hardware Tab
Support
PCI and Firmware
Information
PCI Information Only
PCI and Firmware
Information
PCI Information Only
PCI and Firmware
Information
PCI and Firmware
Information
PCI and Firmware
Information
PCI and Firmware
Information