Uninstalling The Barcomed 2Mp2Cp Driver - Barco MGP 15 Dicom Theater Hardware & Software Installation & User Manual

Driver re-installation, updates or removal
3. To update the driver, clear the checkbox next to (figure 38)
and click "Install".
4. For Windows 2000 or Windows XP please turn to Step 6 on
page 38 in the section titled "Windows 2000
BarcoMed 2MP2CP software installation" and follow the
instructions to finish reinstalling or updating your
BarcoMed 2MP2CP driver.
When the driver has finished installing, click "Finish". Then click
"Finish" again.
Reboot the system when prompted and then reset the resolution
of your displays if necessary.

Uninstalling the BarcoMed 2MP2CP driver

Special Note: The BarcoMed Uninstaller is supported only on
Windows 2000 and Windows XP.
To remove the BarcoMed 2MP2CP display controller driver from
your system you must be logged in using an account with
administrator privileges.
98
Figure 38