Specification Table - JAI CV-M 9CL Operation Manual

Digital 3ccd progressive scan rgb color camera
Table of Contents

Advertisement

10.2. Specification table

Specifications
Scanning system
Frame rate
Line frequency
Pixel frequency
CCD sensors
Sensing area
Effective pixels
Cell size
Pixels in video output full
1/2 partial
1/4 partial
1/8 partial
Sensitivity (on sensor)
S/N ratio
Video outputs.
Iris video output
Gamma
Gain
Gain range
White balance
Tracking range
Dynamic shading correction
Knee correction
Synchronization
Inputs
TTL
Camera Link
Outputs
TTL
Camera Link
Control interface
Trigger modes
Trigger function
Shutter speed (fixed).
Programmable exposure
Pulse Width Control
Sensor gate control
Functions controlled by
RS 232C or Camera Link
Operating temperature
Humidity
Storage temp./humidity
Vibration
Shock
Regulations
Power
Lens mount
Flange back
Optical axis
Dimensions
Weight
Note:
Above specifications are subject to change without notice
Specifications are valid after a 30 min. warm up period.
V binning
V binning
3 x 8 bit RGB via single port Camera Link base configuration
3 x 10 bit RGB via dual port Camera Link medium configuration
Manual/one push, continuous, Fixed 3200K, 4600K, 5600K
1/30, 1/60, 1/100, 1/120, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10,000
Trigger, Shutter, scanning, readout, polarity, gain, Set-up, white balance, knee
CV-M9 CL
CV-M9CL
Progressive
30 fps (792 lines per frame)
23.768 kHz (1420 clk per line)
19.622 kHz (1720 clk per line)
33.75 MHz
3 x 1/3" IT CCD on prism. Sony ICX204AL
4.8 (h) x 3.6 (v) mm
1034 (h) x 779 (v)
4.65 (h) x 4.65 (v) µm
1024 (h) x 768 (v) 30fps. (792 lines per frame)
1024 (h) x 384 (v) 48fps. (492 lines per frame)
1024 (h) x 192 (v) 68fps. (384 lines per frame)
1024 (h) x 96 (v) 86fps. (276 lines per frame)
1024 (h) x 384 (v) 50fps. (396 lines per frame)
6 Lux, 0dB gain, 100% video
2 Lux, max gain, 50% video
>50 dB. (On Green)
0.7 Vpp, 75 Ω
1.0
Manual for all 3 colors
Master -3 to +12 dB. R and B –6 to +6 dB
-6 to +6 dB. (2800K to 6500K)
On/Off
Knee point and slope individually for RGB
Int. X-tal. or random trigger
Ext. trigger 4 Vpp ±2 V. (TTL or 75 Ω)
Ext,. trigger
EEN output 4 Vpp from 75 Ω source
RGB 8/10 bit video output. D0 – D9
Pixel clock, DVAL, LVAL, FVAL and EEN
TXD and RXD via RS232C
serTC and serTFG via Camera Link
Continuous, Edge Pre-Select, Pulse Width Control,
Reset Continuous Trigger and Sensor Gate control
LVAL synchronous or LVAL a-synchronous
1/16,000 and 1/50,000 sec.
0L – 791L. RGB common or individual. (L=50.96µs.)
>2L to <23760L (>84 µs to <1s)
>1Frame to <30 frames. (>1/30s to <1s)
point and slope
-5°C to +45°C.
20 - 80% non-condensing
-25°C to 60°C./20% - 90 % non-condensing
10 G (15 Hz – 200 Hz in XYZ)
70 G
CE (EN 50081-1, EN 50082-1) FCC part 15 class B
12V DC ± 10%. 0.62A
C-mount. (Max 4.0 mm thread)
17.526mm +0 –0.05mm
Centre ±0.1mm
50 x 60 x 99 mm (HxWxD)
400 g
- 37 -

Advertisement

Table of Contents
loading

Table of Contents