Installing The Cpu And Heatsink Procedures - IWILL DJ800 User Manual

DJ800 Motherboard

Installing the CPU and Heatsink Procedures

IWILL DJ800 support Intel Xeon @FSB800 MHz processor. We only recommend using
the Intel Original heatsink kit. CEK (Common Enabling Kit) is specially designed for the
Intel latest Xeon. For installing CEK, please follow direction as below.
Step 1-- Before you install the heatsink, please check whether the attached Hat
Springs fasten well to the back of this motherboard or not.
Step 2-- Raise the retaining lever of the processor locking mechanism to a
perpendicular position.
Raise the retaining lever
________________________________________________________________________
Hardware Installation
Raise the socket lever to
the vertical position
3-3