1. Manuals
  2. Brands
  3. IWILL Manuals
  4. Motherboard
  5. DPL533
  6. User manual

IWILL DPL533 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DPL533
User's Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DPL533 and is the answer not in the manual?

Questions and answers

Related Manuals for IWILL DPL533

Summary of Contents for IWILL DPL533

  • Page 1 DPL533 User’s Guide...
  • Page 2 IWILL makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. IWILL shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

  • Page 3: Table Of Contents

    Contents OVERVIEW…………………………………………………..I .................... NPACKING ................EATURES IGHLIGHT ..............BOUT UIDE ..................ETTING DPL533 M ) ............. OTHERBOARD ICTURE DPL533 M )............OTHERBOARD AYOUT CHAPTER 1:HARDWARE INSTALLATION………..…1-1 Step 1:Jumper Setting………………………………………………….1-2 Step 2:Install Memory ..............1-3 Step 3:Install CPU................1-5 Step 4:Attach Cable to Connectors ..........1-7 Step 5:Install Expansion Cards............1-16...
  • Page 4 APPENDIX A: SYMPTOM CHECKING LIST……….A-1 APPENDIX B: SYMPTOM REPORT FORM…….…...A-3...

  • Page 5: Overview

    The DPL533 is a dual Socket-604 motherboard (M/B) based on Intel the ATX form factor. As the latest North Bridge Placer (MCH) with South Bridge ICH4: PCI-X Bridge P64H2 is built in the M/B, DPL533 fully supports ® Prestonia) Intel...

  • Page 6: Features Highlight

    Features Highlight ® Processor Support dual Intel Xeon (Prestonia) Socket-604 CPUs at 533 MHz Host Bus Interface Integrated VRM complies to spec 9.1 Chipset Chipset E7505 North Bridge Placer (MCH) South Bridge ICH4 PCI-X Bridge P64H2 Memory Four DIMM sockets and support up to 8GB Support memory size...
  • Page 7 DMI 2.0 compliant Soft Power-down System Bus 533/400 MHz Data Bus Frequency Dual Channel (144-bits wide) DDR memory interface System IWILL CheckUp to alert the event of Management hardware problem Prevent from abnormal system down/data loss Alert on LAN ready...

  • Page 8: About This User Guide

    About This User Guide This manual explains how to build your system with DPL533 in detail. Please follow the procedures of this User’s Manual carefully and pay special attention to these icons. This icon informs you for particularly important IMPORTANT details regarding the setup or maintenance of your system.

  • Page 9: Getting Help

    FAQ sections on IWILL Website are often helpful since other user’s questions are often your own. Email us at: sales@iwill.net and we will try to answer your questions within 24 hours. Before you email your symptom to sales@iwill.net, please fill in the symptom report form (page A-5) in order to let our engineers solve your problem quickly.

  • Page 10: Dpl533 Motherboard (Picture)

    DPL533 Motherboard (Picture) 8 Pin Power Connector 4 DDR DIMM Sockets Main Power Connector CPU 1 CPU 2 AGP 8X 2 PCI-64 Slots 1 PCI-64 slot 2 PCI-32 Slots Floppy IDE Connectors Connector IDERAID Connectors Overview...
  • Page 11 DPL533 Motherboard (Layout) A G P P C IX -1 P C IX -2 P C I6 6 -1 R A I D 1 P C I3 2 -1 R A I D 0 ID E 1 P C I3 2 -2...
  • Page 12 A G P P C IX -1 P C IX -2 P C I6 6 -1 R A ID 0 P C I3 2 -1 R A ID 1 ID E 1 P C I3 2 -2 ID E 0 U S B 4 &...

  • Page 13: Chapter 1:Hardware Installation

    Chapter 1 Hardware Installation In this chapter, the installation of the DPL533 with the processor and other hardware connected to your system will be explained in detail. Installation Procedures Installation procedures will be broken up into six major parts. Step 1:Jumper setting...
  • Page 14 Step 1. Jumper Setting Clear Real Time Clock (RTC) RAM-CN30 The onboard button cell battery powers the CMOS RAM. It contains all the BIOS setup information. Normally, it is necessary to keep the jumper connected to pin2 and pin3 (Default) to retain the RTC data as shown below. 1¡...

  • Page 15: Step 2:Install Memory

    Step 2 Install Memory DPL533 uses 184-pin Double Data Rate (DDR) Inline Memory Modules (DIMM). Four DIMM sockets are available for Unbuffered DDR DRAM Module with 128MB, 256MB, 512MB and 1GB combinations. And the total memory size is between 128MB and 8GB.

  • Page 16: Memory Installation Procedures

    Memory Installation Procedures 1. Locate the DIMM modules on the DPL533. 2. Make sure the DIMM module’s pins face down and match the socket’s size as depicted below. 3. Insert the module down to the DIMM socket in with both hands and press down firmly until the DIMM module is securely in place.

  • Page 17: Step 3:Install Cpu

    Step 3 Install CPU ® DPL533 uses dual Intel Xeon (Prestonia) socket-604 processors at 533 MHz FSB and support 2.5 GHz plus. CPU Installation Procedures 1. Lift up the socket lever and carefully place the Xeon CPU with the correct orientation as the figures are shown below 2.
  • Page 18 Hardware Installation...

  • Page 19: Step 4:Attach Cable To Connectors

    Step 4. Attach Cable to Connectors This step explains where each connector is inserted on the DPL533. There will be a DPL533 layout picture following each explanation indicating where the connector is inserted. The motherboard connectors are: CN13 CN17 CPU1...
  • Page 20 Item Connectors Page ATX Power Supply Floppy Disk Drive Connector Primary IDE Connectors 1-10 Promise PDC 20271 IDERAID Controllers (optional) 1-11 Reset Switch Header 1-12 Hard Disk Activity LED Header 1-12 Speaker Header 1-12 System Power LED Header 1-12 CPU and Aux Fan Connectors 1-12 Onboard Broadcom 5702 Ethernet Controller 1-12...

  • Page 21: Atx Power Supply

    For Wake on LAN support, 5-volt Stand-by lead (+5VSB) from ATX power supply must supply at least 720mA. IWILL strongly recommend user to use 400w power supply at least. +3.3v +3.3v -12v +3.3v...
  • Page 22 3. Primary/Secondary IDE connectors (ATA-100100 IDE connectors (Two 40-pin IDE) The connectors support the provided 80-wire 40-pin IDE hard disk ribbon cable. After connecting the single end to the board, connect the two plugs at the other end to your hard disk(s). If you install two hard disks in the same cable, you must configure the second drive to Slave mode by setting its jumper accordingly.

  • Page 23: Promise Pdc 20271 Ideraid Controllers (Optional)

    4. Promise PDC 20271 IDERAID Controllers (Optional) DPL533 uses Promise PDC 20271 IDERAID chipset and provides connectors for IDE devices. Please refer to the “Promise PDC 20271 IDERAID Controller User’s Guide” for further information. Pin1 D D R A 1...

  • Page 24: Reset Switch Header

    LED to light up. 10. CPU and Aux Fan Connectors (4 3-pin FAN connectors) There are five 3-pin fan connectors in the DPL533 M/B. Two fans are used for CPU1 and CPU2 one is for system fan power and two are for auxiliary power.
  • Page 25 PDPEA FAN Location 11. Onboard Broadcom 5702 Gigabit Ethernet Controllers controller DPL533 uses Broadcom 5702 Gigabit Ethernet . It consists of both the Media Access controller and 10/100 Mbps Physical Layer (PHY) interface. The RJ45 connector provides both 10Base-T and 100Base-TX connectivity.

  • Page 26: Ps/2 Mouse Port

    Print Port 2PCI-X Slots 2 32-bit PCI Slots AGP slot COM1 Port COM2 Port LAN Ports 1 PCI-64 slot USB Ports PS/2 Ports Figure 1-2 Item 12 through 16 are depicted in Figure 1-2 as above. 12. PS/2 Mouse Port (6-pin Female) The upper port The system will direct IRQ12 to the PS/2 mouse if one is detected.

  • Page 27: Parallel Printer Port

    See the BIOS Setup. 17. Wake-On-LAN function controller DPL533 uses Broadcom 5702 Gigabit Ethernet . User can use Wake-On-LAN function to wake up your computer. Please refer to the “Broadcom 5702 Ethernet Controller User ‘s Guide” for further information.

  • Page 28: Step 5:Install Expansion Cards

    Step 5. Install Expansion Cards WARNING Power off your power supply completely when adding removing any expansion cards or other system components. Failure to do so may cause severe damage to both your motherboard and expansion cards. 1. Expansion Card Installation Procedure 1.1 Read the documentation for your expansion card and making any necessary hardware or software setting changes, such as jumpers.

  • Page 29: Step 6:Powering On Your Computer

    Step 6. Powering on Your Computer 1. Be sure that all switches are off (in some systems, marked with “O”). 2. After finishing all jumper settings and connections, close the system case cover. 3. Connect the power supply cord into the power supply located on the back of your system case.
  • Page 30 You have to first exit or shut down your operating system before switching off the power switch. For ATX power supplies, you can press the ATX power switch after exiting or shutting down your operating system. IWILL strongly recommend user to use 400w power supply at least. Hardware Installation...

  • Page 31: Chapter 2:Bios Setup

    Chapter 2 BIOS Setup This chapter discusses the PhoenixBIOS Setup program built into the ROM BIOS. The Setup program allows users modifying the basic system configurations according to their requirements. This special information is then stored in battery-backed RAM so that it retains the Setup information when the power is turned off.

  • Page 32: Using Setup

    briefly at the bottom of the screen during the POST (Power On Self-Test). Press F2 to enter SETUP. If the message disappears before you respond and you still wish to enter Setup Program, restart the system from state “On” to state “Off” by pressing the "RESET"...
  • Page 33 Function Up Arrow ( ) Key Move to the previous item Down Arrow ( ) Key Move to the next item Left Arrow ( ) Key Move to the previous item Right Arrow ( ) Key Move to the next item Esc key In the Sub-menu: Exit the sub-menu.

  • Page 34: In Case Of Problems

    In Case of Problems If after making and saving system changes with Setup, you discover that your computer no longer is able to boot, the PhoenixBIOS supports an override to the CMOS setting, which resets your system to its defaults. The other way is clear the present CMOS information.

  • Page 35: Section 1:Main Menu

    Section 1 Main Menu To start the PhoenixBIOS Setup utility: Step 1: Turn on or reboot your system.PhoenixBIOS displays this message: Then Press <F2> to enter SETUP Step 2: Pressing <F2> displays the Main Menu, which looks like this: PhoenixBIOS Setup Utility Main Advanced Security...

  • Page 36: The Menu Bar

    The Menu Bar The Menu Bar at the top of the window lists these selections: Function <F1> or <Alt-H> General Help window (See below). <Esc> Exit this menu. arrow keys Select a different menu. ↑ or ↓ arrow keys Move cursor up and down. <Tab>...

  • Page 37: The Legend Bar

    The Legend Bar Use the keys listed in the legend bar on the bottom to make your selections or exit the current menu. The chart on the following page describes the legend keys and their alternates: Function <F1> or <Alt-H> General Help window (See below).

  • Page 38: The Field Help Window

    The Field Help Window The help window on the right side of each menu displays the help text for the currently selected field. It updates as you move the cursor to each field. The General Help Window Pressing <F1> or <Alt-H> on any menu brings up the General Help window that describes the legend keys and their alternates: General Help Setup changes system behavior by modifying the BIOS...

  • Page 39: Main Menu Selections

    Main Menu Selections You can make the following selections on the Main Menu itself. Use the sub menus for other selections. Feature Options Description System Time HH:MM:SS Set the system time. System Date MM/DD/YYYY Set the system date. Diskette 1 360 kB, 5 ¼"...
  • Page 40 There is one IDE connector for each adapter on your machine, usually labeled "Primary IDE" and "Secondary IDE." There are usually two connectors on each ribbon cable attached to each IDE connector. When you have connected two drives to these connectors, the one on the end of the cable is the Master. If you need to change your drive settings, selecting one of the Master or Slave drives on the Main Menu displays a sub-menu like this: PhoenixBIOS Setup Utility...
  • Page 41 Feature Options Description Type None None = Autotyping is not able to supply 1 to 39 the drive type or end user has selected User None, disabling any drive that may be Auto installed. User = You supply the hard-disk drive Removable information in the following fields.
  • Page 42 * IDE drives do not require setting Landing Zone and Write Precomp. When you enter Setup, the Main Menu usually displays the results of Autotyping– information each drive provides about its own parameters (e.g., cylinders, heads, and sectors)–and how the drives are arranged as Masters or Slaves on your machine.

  • Page 43: Section 2:Advanced Menu

    Section 2 Advanced Menu Selecting "Advanced" from menu bar on the Main Menu displays a menu like this: PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit Item Specific Help Advanced Chipset Control I/O Device Configuration Select options for Advanced Processor Options Advanced Chipset DMI Event Logging features.

  • Page 44: Advanced Chipset Control

    Advanced Chipset Control In a system, user can selecting "Advanced Chipset Control" from menu bar on the Advanced menu displays a menu like this: PhoenixBIOS Setup Utility Advanced Advanced Chipset Control Item Specific Help Graphics Apertures: [64MB] Enable memory gap: [Disabled] Controls system memory parity...

  • Page 45: Advanced Processor Options

    Advanced Processor Options In a system, user can selecting "Advanced Processor Options" from menu bar on the Advanced menu displays a menu like this: PhoenixBIOS Setup Utility Advanced Advanced Processor Options Item Specific Help Frequency Ratio [X 8] Fast String operations [Enabled] Select the internal Compatible FPU Code...
  • Page 46 ♦ I/O Device Configuration Menu The CPU communicates with external devices such as printers through devices called Input/Output (I/O) ports such as serial and parallel ports. These I/O devices require the use of system resources such as I/O addresses and interrupt lines. If these devices are Plug and Play, either the BIOS can allocate the devices during POST, or the operating system can do it.
  • Page 47 Feature Options Description Serial port A: Disabled Disabled turns port. Serial port B: Enabled Enabled requires you to enter the base Auto Input/Output address and the Interrupt number next line. Auto makes the BIOS configure the port automatically during POST. Base I/O 3F8, IRQ 4 If you select Enabled, choose one of...
  • Page 48 Warning If you choose the same I/O address or Interrupt for more than one port, the menu displays an asterisk (*) at the conflicting settings. It also displays this message at the bottom of the menu: *Indicates a DMA, Interrupt, I/O, or memory resource conflict with another device.

  • Page 49: Section 3:Power Menu

    Section 3 Power Menu Selecting "Power" from the menu bar displays a menu like this: PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit Item Specific Help Enable ACPI (debug only): [Yes] En/Disable ACPI BIOS (Advance Configuration and Power Interface) Instant Off: [Yes] Debug only, remove this...
  • Page 50 Enable ACPI Enabled/ disable ACPI BIOS (Advanced Configuration and Power Interface) Debug only, remove this option for production. Instant off Disabled When press power button Enabled seconds, the system will shut down. Intruder interrupt Disable The system will shut down select automatically when you open the case.

  • Page 51: Section 4:Boot Menu

    Section 4 Boot Menu After you turn on your computer, it will attempt to load the operating system (such as Windows 98) from the device of your choice. If it cannot find the operating system on that device, it will attempt to load it from one or more other devices in the order specified in the Boot Menu.
  • Page 52 Selecting "Boot" from the Menu Bar displays the Boot menu, which looks like this: PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit Item Specific Help CD-ROM Drive Keys used to view or +Hard Drive configure devices: +Removable Devices <Enter> expands or Network Boot collapses devices with a + or –...
  • Page 53 Note Floppy drives are not managed on this menu as part of Removable Devices. To change a device’s priority on the list, first select it with the up-or-down arrows, and move it up or down using the <+> and <-> keys. Pressing <n> moves a device between the Removable Devices and Hard Drive.

  • Page 54: Section 5:Exit Menu

    Section 6 Exit Menu Selecting "Exit" from the menu bar displays this menu: PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit Item Specific Help Exit Saving Changes Exit System Setup Exit Discarding Changes and save your Load Setup Defaults changes to CMOS.

  • Page 55: Exit Discarding Changes

    Values have been saved to CMOS! Press <space> to continue If you attempt to exit without saving, the program asks if you want to save before exiting. During boot up, PhoenixBIOS attempts to load the values saved in CMOS. If those values cause the system boot to fail, reboot and press <F2>...

  • Page 56: Save Changes

    displays this message: CMOS values have been loaded! Press <space> to continue Save Changes Selecting “Save Changes” saves all the selections without exiting Setup. You can return to the other menus if you want to review and change your selections. BIOS Setup...

  • Page 57: Chapter 3:Bios Flash Upgrade Utility

    Chapter 3 BIOS Flash Upgrade Utility Phoenix Phlash16.exe gives you the ability to update your BIOS from a floppy disk without having to install a new ROM BIOS chip. Phoenix Phlash16.exe is a utility for "flashing" (copying) the BIOS to the Flash ROM installed on your computer from a floppy disk.

  • Page 58: Executing Phoenix Phlash16.Exe Program

    Executing Phoenix Phlash16.exe program You can run Phoenix Phlash16.exe program to upgrade your BIOS version. To put the Phlash16.exe program into A:\ To put the BIOS into A:\ Typing the command” A:\Phlash16 BIOSNAME.rom” Upgrade your BIOS completely. Create the Crisis Recovery Diskette If the OEM or dealer from whom you purchased your system has not provided you with one, then you should create a Crisis Recovery Diskette before you use the Phlash utility.
  • Page 59 Updating the Crisis Recovery Diskette If the BIOS image (BIOS.ROM) changes due to an update or bug fix, you can easily update the Crisis Recovery Diskette. Simply copy the new BIOS.ROM image onto the Crisis Recovery Diskette. No further action is necessary. WARNING For your own protection, be sure your have a Crisis Recovery Diskette ready to use before excuting Phlash.
  • Page 60 DOS 5.0 (or later version) For DOS 5.0 and later, follow the two steps below to disable any memory managers on your system. If you are not using at least DOS 5.0, then you must create a boot diskette to bypass any memory managers (See Create a Boot Diskette, below).
  • Page 61 reboot the system. 3. When your system reboots, Phoenix Phlash will restore the BIOS from the diskette and successfully boot the operating system. BIOS Flash Utility...
  • Page 62 Check if the memory DDR DIMM module is inserted into DDR DIMM socket properly. Check if different speed memory modules are mixed and used in the DPL533. Verify the BIOS setup is configuration for the fastest speed of DDR RAM used. IWILL recommend...
  • Page 63 always use the same speed RAM in the system. Make sure your memory module(s) is compliant with Unbuffered DRAM Module. Unbuffered ECC DIMM support Troubleshooting...

  • Page 64: Symptom Report Form

    Appendix B Symptom Report Form DPL533 Serial BIOS Number version CPU 1 CPU 2 DIMM 0 Size Brand Component Model DIMM 1 Size Brand Component Model DIMM 2 Size Brand Component Model DIMM 3 Size Brand Component Model AGP 8X...
  • Page 65 Other Devices Operating system Symptom Description: Name: Contact email address: Troubleshooting...

Table of Contents