Installing A Cpu; Processor Selection - IWILL K7S3 Series User Manual

K7S3 Series Motherboard
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
4•2 4•2 4•2
4•2 4•2
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Installing A CPU

To install a CPU on the motherboard it is important to
follow the entire procedure for installing both the CPU
and its cooling assembly. Failure to do so can result in
either improper operation or damage to the CPU and
possibly the motherboard.
To install an AMD CPU on this motherboard you will
need to do the following:
• Install an AMD processor in the Socket 462 socket
• Install a Cooling Fan/Heatsink assembly
Please follow the procedure detailed below to install the
processor on the board. AMD boxed Athlon and Duron
processors come with full installation instructions. If you
have them, please also read and follow those instruc-
tions carefully.

Processor Selection

This motherboard uses any 462-pin "Socket A" AMD
Athlon, Athlon XP or Duron processor. All current pro-
cessor speeds are supported. The BIOS default is 100MHz
FSB. Please configures the CPU Frequency as 133 when
you install AMD Athlon XP. You may also config the FSB
freq up to 166MHz via 1MHz increasement.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
U U U U U ser' ser' ser' s Manual s Manual
ser' ser's Manual s Manual s Manual
○ ○ ○
○ ○ ○