Installing The Cpu And Heatsink Procedures - IWILL DN800 User Manual

H a r d w a r e I n s t a l l a t i o n
D N 8 0 0 M o t h e r b o a r d

Installing the CPU and Heatsink Procedures

IWILL DN800/DNSV support Intel Xeon @FSB800 MHz processor.
We only recommend using the Intel Original heatsink kit. CEK (Common
Enabling Kit) is specially designed for the Intel latest Xeon. For installing
CEK, please follow direction as below.
Step 1 — Before you install the heatsink, please check whether the attached Hat
Springs fasten well to the back of this motherboard or not.
Step 2 — Position the attached silver standoffs for the special-designed iron
plate.
3-2