Equipment Required - Motorola MVME167 Series User Manual

General Information
1

Equipment Required

The following equipment is required to make a complete system using the MVME167:
Terminal
Disk drives and controllers
Transition module MVME712-12, MVME712-13, MVME712M, MVME712A,
MVME712AM, or MVME712B, and connecting cables and P2 adapter
Operating system
The MVME167Bug debug monitor firmware (167Bug) is provided in two of the four
EPROM sockets on the MVME167 main module. It provides over 50 debug,
up/downline load, and disk bootstrap load commands, as well as a full set of onboard
diagnostics and a one-line assembler/disassembler. 167Bug includes a user interface
which accepts commands from the system console terminal. 167Bug can also operate
in a System Mode, which includes choices from a service menu. Refer to the
MVME167Bug Debugging Package User's Manual and the Debugging Package for
Motorola 68K CISC CPUs User's Manual for details.
The MVME712X series of transition modules provide the interface between the
MVME167 module and peripheral devices. They connect the MVME167 to
EIA-232-D serial devices, Centronics-compatible parallel devices, SCSI devices, and
Ethernet devices. The MVME712X series work with cables and a P2 adapter.
Software available for the MVME167 includes SYSTEM V/68 and real-time operating
systems, programming languages, and other tools and applications. Contact your local
Motorola sales office for more details.
1-6 MVME167 Single Board Computer User's Manual