Check The Scan Setting Before Scanning - Xerox DOCUMATE 262 User Manual

Check the Scan Setting Before Scanning

DocuMate 262 Scanner User's Guide
1. To check the scan setting before scanning, press, hold down,
and then release, either the Simplex or Duplex button.
Press, hold down,
and then release
either button to
see the setting for
the selected LED
number.
The One Touch Button Panel appears with the description of
the selected setting. This sample shows the current description
of setting 6.
The icon indicates the
Destination Application
for this setting.
The current name of the
setting.
The One Touch Properties window for that setting also appears
in case you want to change scanning options before scanning.
Use this window to reset the button settings for the destination
applications, file formats, and so forth. See "Configuring the
One Touch Buttons" on page 20 to reset the settings.
2. Click the close boxes on the One Touch Button Panel and the
Properties window to close them.
This number corresponds
to the LED on the scanner.
Your document will be scanned with
these options for setting Number 6.
Scanning
15