Table of Contents
Advertisement
Check the Scan Settings Before Scanning
Xerox 6400 Scanner User's Guide
1. To check the scan setting before scanning, press, hold down,
and then release, the button you want to use for scanning.
Press, hold down,
and then release
a button to see its
settings.
The One Touch Button Panel appears with the button's
settings. This sample shows the current description of the Scan
button.
The icon indicates the
Destination Application
for this button.
The One Touch Properties window for that button also appears
in case you want to change scan settings before scanning.
You use this window to reset the configuration, destination
applications, file formats, and so forth. See "Configuring the
One Touch Buttons" on page 40 to reset the settings.
2. Click the close boxes on the One Touch Button Panel and the
Properties window to close them.
Your document will be scanned
with these settings.
Scanning
17
Advertisement
Table of Contents
