Step 3: Connect And Power On The Scanner - Xerox DOCUMATE 262 User Manual

Step 3: Connect and Power On the Scanner

DocuMate 262 Scanner User's Guide
Connect the power supply and power cord, and then turn the
power on.
To connect your DocuMate 262 scanner:
1. Plug the power supply into the power port on the scanner.
NOTE: Only use the power supply (SA60-24 made by Sino-
American) included with your scanner. Connecting any other
type of power supply may damage your scanner and will void its
warranty.
2. Plug the power cord into the power supply and into a wall
outlet.
3. Turn on the power switch, located on the back of the scanner to
the left of the power port.
The status light comes on and flashes indicating that the
scanner is receiving power.
Now proceed to the next section, "Step 4: Connect the USB
Cable."
Installation
9