Xerox DOCUMATE 262 User Manual page 84

DocuMate 262 Scanner User's Guide
The following figure shows the input size options.
To Auto Trim an item:
1. Select Auto Trim, and then click the Preview button.
The scanner feeds in the page, senses its edges, and draws a
dotted line around the page. If you are scanning multiple
pages, that will be the scan size for all of them.
If you already previewed the page and its image is displayed on
the Advanced Interface, just click the Trim button to see the
dotted line around the edges of the trim area.
2. Check to make sure the dotted line encloses the area you want
to scan.
A new Scan Info box at the lower left of the Advanced Interface
shows the information for the auto trimmed area.
If the dotted line is not exactly where you want it, put the pointer
on the line and drag the mouse.
For example, if you want the scan to include a border around
the area, drag the line to be slightly larger than the auto
trimmed area.
3. When the trimmed area is what you want, replace the page that
you used to get the auto trim area in step 1 above.
4. Click Scan.
If you are scanning multiple pages, they are all scanned with
the same auto trim area.
Scanning from PaperPort
79