York Fitness DIAMOND X301 Owner's Manual page 9

6. Connect the upper and lower moving handlebars
1. Slide the lower moving handlebar up into the tube
of the upper moving handlebar
2. Choose a height adjustment hole and secure in
position with the pull plunger
3. Repeat for the other side, making sure to choose
the height adjustment hole in the same position
7. Attach the console
1. Connect the wire to the back of the console
2. Secure the console onto the bracket using screws
as shown (screws are located in the back of the
console)
8. Attach the handlebars
1. Open the handlebar clamp bracket and place
the handlebar inside
2. Close the clamp bracket and place the front
and rear handlebar bracket covers over it
3. Secure in place using the handle and screws
as shown
!
Make sure the handle bolts is fastend tightly
81
123
82
40
FIXINGS: FIXINGS:
Part
No.
81
x 2
FIXINGS: FIXINGS:
Part
No.
123
x 4
FIXINGS: FIXINGS:
Part
No.
40
x 2
43
Part
No.
43
x 2
40
Part
No.
82
x 1
9