York Fitness DIAMOND X301 Owner's Manual page 10

9. Attach the plastic covers
1. Attach the plastic covers using the screws as shown
in the diagrams below
10. Attach the water bottle and holder
1. Fix the water bottle holder to the front post using the
screws as shown (screws are located in the front post)
2. Slide the water bottle into the holder
Final Checks
Your cross trainer is now assembled. Please make the following final checks before you use it for the first time.
•
Make sure all screws / bolts are tightened
•
Make sure you have positioned it on a flat, level surface
Power up
1. Plug one end of the adaptor into your cycle as shown
2. Plug the other end into a suitable AC outlet (220 – 240v – 50Hz)
10
119
119
115
FIXINGS: FIXINGS:
Part
No.
118
Part
No.
119
118
119
FIXINGS: FIXINGS:
Part
No.
115
x 2
x 6
x 2