Christie LWU505 User Manual page 54

Setting
Display
This function decides whether to display On-Screen
Displays.
On......................... Show all the On-Screen displays. Use
this function when you want to project
images after the lamp becomes bright
enough. The factory default setting is
in this option.
Countdown Off.... Show the input image instead of
the countdown when turning on the
projector. Use this function when you
want to project the image as early as
possible even when the lamp is not
bright enough.
Off ........................ Hide the On-Screen Displays except:
On-Screen Menu
Power off? (p.24)
No signal for Power management.
(p.59)
Please wait ...
White Arrows for panning mode
(p.42)
P-timer
Simple mode
Video delay control
Picture in Picture
Corner pattern
Background
Select the background screen for when no input signal is
detected. Press the Point
each option.
Blue Project a blue background.
User Project an image captured in the Logo setting.
It is invalid when there is no image.
Black Project a black background.
Logo (Logo and Logo PIN code lock settings)
This function allows you to customize the screen logo
with Logo select, capture, Logo PIN code lock and
Logo PIN code change functions.
Note:
On
Logo select Capture
change
Logo select
This function decides on the starting-up display
from among following options.
Off ......... Show the countdown display only.
User....... Show the image you capture.
Default .. Show the factory-set logo.
52
buttons to switch among
Logo PIN code
Logo select
LWU505 User Manual
020-000374-01 Rev.1 (01-2011)