Positioning The Skirt (On Some Models Only); Positioning And Levelling The Appliance; Wall Mounting Brackets (Where Present) - Smeg Oven Instructions For Use Manual

11.7 Positioning the skirt (on some models only)

The skirt must always be positioned and secured correctly on
the appliance.
1 Loosen the 4 screws (A) on the back of the worktop (2 for
each side).
2 Place the skirt above the worktop, taking care to align the
skirt's slots (B) with the screws (A).
3 Secure the skirt to the worktop by tightening screws (A).

11.8 Positioning and levelling the appliance

After making the electrical and/or gas connections, level the
appliance on the floor by means of its four adjustable feet.
First insert the front feet and then the rear feet.
The appliance must be properly levelled to ensure better
stability. Screw or unscrew the bottom part of the foot until the
appliance is stable and level on the floor.
To prevent possible damage to the appliance, we recommend to screw first the front feet and then the
rear ones.

11.9 Wall mounting brackets (where present)

The fastening system provided must be installed to ensure the appliance is stable. If installed correctly,
this system prevents the appliance tipping over.
1)
Use the adjustable feet to level the appliance at
the required height.
Instructions for the installer
2)
Measure the distance from the index of the
opening to the floor.
EN
25