Output Destination - Olivetti D-COPIA 8200 Advanced Operation Manual

Output Destination

Particular trays of the document finisher or multi-job tray can be specified as the output destination
for completed copies.
Destination
Auto
Tray A
Tray B
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
NOTE: Requires the optional document finisher and multi-job tray.
You can change the default destination for copies. Refer to Selecting Output Destination on
page 3-29 for details.
You can check the record of where completed jobs were sent. Refer to Output Management
Functions on page 2-16 for details.
Follow the steps as below to select the output destination.
1 Press [Function] and then [
2
Press [Select of Output].
3 Select the output destination for finished
copies.
4 Place the originals in the document processor or on the platen. Press the Start key to start copying.
Description
Copies are sent to an empty tray. If multiple trays are empty, copies
are sent to the bottom tray first and higher trays thereafter.
Sent to the tray A of the document finisher.
Sent to the tray B of the document finisher. This tray cannot be
specified when the multi-job tray is installed.
Sent to the tray 1 (the first tray) of the multi-job tray.
Sent to the tray 2 (the second tray) of the multi-job tray.
Sent to the tray 3 (the third tray) of the multi-job tray.
Sent to the tray 4 (the fourth tray) of the multi-job tray.
Sent to the tray 5 (the fifth tray) of the multi-job tray.
Down].
Ready to copy.
Auto Image
Rotation
EcoPrint
Repeat
Copy
Basic
Ready to copy.
Output Tray
Copying Functions
OHP Back Memo
Proof Copy
Pages
Original Negative Mirror
Orient. Image Image
Output Staple Multi-page
Tray /Punch Form
User choice
Function
Register
Auto Tray 3
Tray A Tray 4
Tray 1 Tray 5
Tray 2
Paper Size
A
100%
Up
Down
Program
Paper Size
A
100%
Back
Select proper output tray to a
job mixing .
You can confirm output tray w
management .
1-49