Activating Auto Clear; Prioritizing Copying Over Printing - Olivetti D-COPIA 8200 Advanced Operation Manual

System Settings

Activating Auto Clear

When this setting is activated, the copier reverts to the state after warm-up if no copies are made.
1
Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2 Press [ ] or [ ] to select Auto Clear
and press [Change #].
3
Select [On] or [Off].
4 Press [Close]. The touch panel will return to the Machine Default screen.

Prioritizing Copying Over Printing

You can assign a higher priority to processing copying jobs than printing jobs.
NOTE: Copy Job Priority is displayed when installing the optional printer kit.
1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2
Press [ ] or [ ] to select Copy Job
Priority and press [Change #].
3 Select [On] or [Off].
4
Press [Close]. The touch panel will return to the Machine Default screen.
3-34
System Menu / Counter
Machine Default
Default menu
Date/Time 08/08/'08 07:03
Time Zone GTM +09:00
8200
Change MGMT code with #
Auto sleep On
Auto Clear On
System Menu
Auto Clear
Returns to Default automatically after copying is done
or when the set time is passed after the last operation .
Off
On
System Menu - Machine Default
System Menu / Counter
Machine Default
Default menu
Time Zone GTM +09:00
8200
Change MGMT code with #
Auto sleep On
Auto Clear On
Copy Job Priority Off
System Menu
Copy Job Priority
Make Copy Jobs priority
instead of Print Jobs .
Off
On
System Menu - Machine Default
Setting mode
Change #
Back
Setting mode
Change #
Back