Output Destination - Olivetti d-Copia 200MF Advanced Information

Printer Settings

Output Destination

2-46
1 Display the Paper Handling screen, refer to Access the Paper Handling
Screen, on page 2-44.
2
Press
Mode and press [Enter].
3 Press
edge bind or Long edge bind and
press [Enter].
4
Press [Reset]. The Printer Basic screen displays.
Use to set the paper Output Destination.
Setting
Top Tray Main body output tray
Finisher Optional Finisher
Job Separator Optional Job Separator
NOTE:
This item is displayed only if the optional Finisher or Job
Separator is installed.
1
Display the Paper Handling screen, refer to Access the Paper Handling
Screen, on page 2-44.
2 Press
Select and press [Enter].
3
Press
output destination and press
[Enter].
4
Press [Reset]. The Printer Basic screen displays.
or to select Duplex
or to select Short
Output destination
or to select Stack
or to select the paper
Paper Handling
Bypass Mode
Feed Select
Duplex Mode
Duplex Mode
Back
None
Short Edge Bind
Paper Handling
Bypass Mode
Feed Select
Stack Select
Select Output Tray
Back
Top Tray
Finisher
ADVANCED OPERATION GUIDE