Density Level - Olivetti D-COPIA 8200 Advanced Operation Manual

Original Orientation
Specify the original orientation as follows.
1
On the [Basic] screen, press [Original
Orient.].
2 Based on the original orientation, press
[Top Edge Top] or [Top Edge Left].
NOTE: Failure to place originals
correctly may result in copying errors.
3
Press [Close].

Density Level

Specify the copy density level as follows.
1 Press [Quality]. On the next screen,
press [Density].
2
For automatic density adjustment, press
[Auto]. To adjust the density manually,
press [Manual]. Next, press [Lighter] or
[Darker] to adjust the density.
3 Press [Close].
Ready to Job build .
Set original . Press Start key .
Job Build Step
1-sided
A4
Paper Original
Selection Type
Auto %
Zoom
Finishing
Basic
Quality
to Job build .
al . Press Start key .
tation
Check Original Orientation . can
be shown at right side of display .
Follow the steps . If setting mode is
wrong, incorrect copy will result .
Ready to Job build .
Set original . Press Start key .
Job Build Step
Text + Photo
Density 4
Density Original
Image
Basic
Quality
Ready to Job build .
Set original . Press Start key .
Density
Auto
Lighter
Manual
Copying Functions
2-sided Copy
1-sided /
2-sided
1-sided Copy -Left
Top Edge Top
Finished page #:
Original
Orient.
Edit
Set
Back
Select Original
Orientation.
Top Edge
Top Edge
Top Left
Off
EcoPrint
1-sided Copy -Left
Finished page #:
Edit
Back
Darker
Close
1-71