Adjusting Auto Density; Adjusting Automatic Density For Scanning Text Documents - Olivetti D-COPIA 8200 Advanced Operation Manual

Adjusting Auto Density

Adjusting the median density for Auto Density by changing the reference density.
1
Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2 Press [ ] or [ ] to select Adjust auto
density and press [Change #].
3
Press [Lighter] if you desire to make
copied images lighter or [Darker] if you
desire to make copied images darker,
when automatic density is selected.
4 Press [Close]. The touch panel will return to the Copy Default screen.

Adjusting Automatic Density for Scanning Text Documents

This menu allows the adjustment of the scanning density when the copier is installed with the
optional scanner. Adjust the density so that the best readability is obtained when the scanned image
is printed and processed with an OCR software application.
NOTE: This setting is available only if the copier is equipped with the optional scanner kit.
1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2
Press [ ] or [ ] to select Adjust auto
density (OCR) and press [Change #].
3 Press [Lighter] to make the scanned
image lighter or [Darker] to make the
scanned image darker.
System Menu / Counter
Copy Default
Default menu
Select media type (APS) Plain
Default Paper Source Cassette 1
Paper Source for Cover Multi purpose tray
Auto % Priority Setting Off
Adjust auto density. Standard
System Menu
Adjust auto density .
Adjust density default setting . (Auto)
Lighter
System Menu - Copy Default
System Menu / Counter
Copy Default
Default menu
Default Paper Source Cassette 1
Paper Source for Cover Multi purpose tray
Auto % Priority Setting Off
Adjust auto density. Standard
Adjust auto density(OCR) Standard
System Menu
Adjust auto density (OCR)
Lighter
System Menu - Copy Default
System Settings
Setting mode
Change #
Back
Setting mode
Change #
Back
3-11
Dar
D