Table of Contents
Advertisement
Adding the back cover is optional.
The paper source to supply the paper for the cover is specified using the system menu. Refer to
Specifying Cassette for Cover Paper on page 3-9.
Thick paper or transparencies must be supplied from the MP tray.
IMPORTANT: During one-sided copying, duplexing and copying on the back of covers are not
available even if specified. Only the front side of the cover will be copied.
Follow the steps as below for adding cover.
1
Place the originals in the document processor or on the platen.
2
Press [Function].
3
Press [Cover].
4
Press [Add Cover] and complete the
front cover settings.
Setting
[Blank]
[Front copy]
[Back copy]
[2 sided copy]
5
For the back cover, press [Add Cover] or
[No cover] as desired.
If you press [Add Cover], complete the
back cover settings.
6
Press the Start key.
If the original is placed on the platen, Scan next original(s) will be displayed. Place the next original
and press the Start key.
After scanning all originals, press [Scanning finished] to start copying.
Ready to copy.
Paper
Selection
Density
Original
Image
Collate/
Offset
Basic
Ready to copy.
Cover
Front cover
No cover
Add Cover
Description
Both the front and back covers are blank.
Copied on the front cover.
Copied on the back cover.
Copied on both the front and back covers.
to copy.
Blank
Front copy
Copying Functions
Duplex
Original
Size
Zoom
Mixed Size
Originals
Margin/
Page
Centering
numbering
Border
Cover
Erase
User choice
Function
Back copy
Blank
Duplex
Front copy
copy
Register
Back cover
Back copy
No cover
Duplex
Add Cover
copy
Paper Size
A
100%
Combine
Continuous
Up
Scan
Form
Down
Overlay
Booklet
Program
Paper Size
A
100%
Register
Back
No cover
Add Cover
Paper Size
Set
A4
100%
Back
Close
Blank
Back copy
Duplex
Front copy
copy
1-29
Advertisement
Table of Contents
