Sharp SJ-H511K-T Operation Manual page 32

Notes
Do not use polishing powder, benzine, hot
water etc.
If undiluted detergent is used or soapy water is not wiped
off thoroughly, cracking of plastic parts can result.
Wipe any food oils adhered to plastic components
as they can cause cracking of the plastic surface.
(Clean once a year)
Back of refrigerator, floor and walls
1
Turn the right and left adjustable feet until they
are off-ground and move the refrigerator.
Adjustable feet
Transportation wheels
(Front, back, left and right)
Foot cover
1
Pull out and remove the
foot cover.
Foot cover
About the stainless tray
Salt adhered on the tray may cause rusting. In this case, clean the tray
with kitchen detergent (cream-type cleanser, etc.) as quickly as possible.
Do not use nylon scrubbing brushes. The tray may become scratched.
When using chemical rags, be sure to follow the accompanied
directions.
There may be build-up of dust from convection of air.
2
Wipe off dirt.
Dust and soil
2
Absorb dust with a vacuum
cleaner.
Remove the dust inside the
foot cover as well.
Wipe off dust
from the power
plug as well.
3
Attach the foot cover at last.
Hole
Tab
Insert the tabs (right and left) on the
foot cover into the holes (right and left)
on the main unit. Insufficient attachment
may lead to abnormal noises.
Remove dust from the holes
on the lower section of the
back side using a vacuum cleaner.
Hole
69