Sharp SJ-H511K-T Operation Manual page 30

Pull up the front
Removing
side and pull out.
Press in the
Removing
front section,
Push in the front section
Mounting
into the back section,
Back section
Front section
Pull up to remove.
Removing
Vegetable crisper (top) • Freezer case (top)
Pull out and pull up
Removing
slightly to remove.
The slides cannot
be removed.
Shelf
Place the back side of the shelf on the rails
Mounting
and insert by fitting the tabs on the front rails.
Three position adjustable shelf
Pull up to remove.
Put in the right and left
tabs as shownm,
Tabs
Ice case
Insert the case along the
Mounting
rail and close the door.
Fit on rail
Fit the slides into the rails and
Mounting
insert by holding the front
section slightly up.
Crisper or Case
With the slides stored
Place the freezer case (small) for freezer case (top)
on top of the freezer case after attaching the case.
The front section and the back
section.
Pull the front section.
Notes
Do not remove accompanying
parts with foods stored.
Accompanying parts become
heavy and injury may occur as a
result of foods and parts dropping.
Do not leave the fridge
compartment doors open for
a long time.
The compartment lamp cover
will become hot.
Do not drop or apply strong
impacts on plastic parts.
They may become cracked.
Shelves cannot be removed if
some cases if the doors cannot
be opened fully (more than 90°).
Lubricant (silicone grease) is
Rail
applied on the crispers and cases
to facilitate sliding.
Do not wipe it off.
67