Express Freezing; Deep Freezing - Sharp SJ-H511K-T Operation Manual

Express Freezing

Place the food material on
1
the stainless tray.
Keep food materials in small sizes.
Select "Express Freezing" with the dial,
2
OFF
3 Turn the dial to the right,
Around
the right
OFF
It will automatically complete in approximately 1 to 4 hours
" " will disappear when it completes.
To cancel operation
2
1
Same as above.
2
Turn the dial left and press "Select."
Operation will stop.
" " disappears.

Deep Freezing

1 Select "Deep Freezing" with the dial,
OFF
Turn the dial to the right,
2
Around
the right
OFF
To cancel operation
(It will automatically cancel after 90 days even
if the following operation is not carried out.)
1 1
Same as above.
2
Turn the dial left and press "Select."
Operation will stop.
" " disappears.
Blinks
ON
'ON' blinks
ON
Notes
This feature cannot be used simultaneously with Express Ice Making.
Start ice making by canceling Express Freezing or after it completes automatically.
The operation noise will be large during this operation (to cool rapidly using inverters).
Large foods cannot be frozen in a single Express Freezing operation.
Express Freezing may require more than 4 hours in the case operation
overlaps with defrosting as operation is started after defrosting is completed.
Avoid opening the door as much as possible during operation
of this feature.
Stores the daintiness of frozen food for a long period under low temperatures.
Blinks
ON
'ON' blinks
ON
Notes
Deep Freezing is continued even during Express Freezing, Express ice making
or Vacation Mode.
The final temperature is approximately -23°C.
(This is when the ambient temperature is 30°C without food or door opening/closing.
It may fluctuate depending on the using conditions including door opening/closing
frequency and installation conditions.)
High-quality frozen foods can be made using this
feature and is convenient for home-freezing.
Press "Select".
'OFF' blinks
OFF
Press "Select". (Finished)
Operation starts up. The LCD panel returns to normal
display in approximately 2 seconds. "
(The required time will vary depending on the ambient temperature).
Press "Select".
'OFF' blinks
OFF
Press "Select". (Finished)
Operation starts up. The LCD panel returns to normal
display in approximately 2 seconds. "
ON
Lights
Lights
up
up
ON
" will be displayed.
ON
Lights
Lights
up
up
ON
" will be displayed.
57