Sharp SJ-H511K-T Operation Manual page 29

Mounting and removing accompanying parts
Fresh case
Pull up the front
Removing
side and pull out.
Insert the tab on one side
into the hole.
Tab
Hole
Temperature zone selection compartment case
Pull up to
Removing
remove.
Vegetable case • Vegetable case partition
Remove the
Removing
vegetable case.
Lift up
the bottom.
Mounting
While pulling the vegetable case sideways,
push the tabs on the vegetable case partition
into the grooves of the vegetable case.
Attach the vegetable case.
Groove
Attach with the characters on the front.
66
(Large one comes to the left)
Insert while lifting
Mounting
up the lid.
If the lid comes off
Then insert the tab on the
other side into the hole.
Tab
Hole
Slowly insert the case
Mounting
along the rails.
Remove the stainless tray by flipping
the temperature zone selection
compartment case upside down.
Pull the vegetable case
sideways to remove
the case partition.
Groove
Tab
Pull up from the
Removing
bottom side.
Pockets are securely mounted.
Pull up from the bottom and
remove slowly.
Insert in the tabs.
Mounting
Securely mount the pockets.
Improper mounting will result in the pockets falling.
Fit on
rail
Vegetable crispers • Freezer cases (center) (bottom)
Pull out the vegetable
crisper or freezer case
Removing
and remove the crisper
or case by pulling up
and further out.
Pockets
Remove
Mount
Removable parts
Place the rollers of
Mounting
the vegetable crisper
or freezer case on the
rails and push in.
Crisper
or Case
Tab
Rail