Configuring The Conference Display - Avaya CS7000 Operation Manual

The status bar is updated to show the filter settings.
Indicates a System Owner
If a change to filters would hide the following, user prompts are displayed:
An active intercept (either the conference to which the Operator is connected
or the intercepted conferee)
or
A conference to which an attached PRI Operator or Monitor is connected
In the case of an active intercept, Operators can choose to release an intercept. In
the case of an attached PRI Operator, Operators can choose to move the
connection to reception.
Note: The Avaya CS7000 Conferencing Server Console Parameter
Descriptions Document describes the filter-related parameters for Avaya
System Administrators.
Configuring the Conference List
At the Conference menu, select List.
1.
The Conference List Control dialog is displayed.
Figure 14.4: The Conference List Control Dialog
Select the required position for the Conference List.
2.
Select the required fields for display on the Conference List.
3.
192
Filter settings (B=Booking, L=Language, O=Operator)
Avaya CS7000 Conferencing Server Operator Guide