Adaptation To Different Types Of Gas - Smeg Oven Instructions For The User

5.2 Adaptation to different types of gas

The appliance is preset for liquid
gas G30/31 at a pressure of 28-
37 mbar.
In case of operation with other types of gas,
the burner nozzles must be changed and
the minimum flame adjusted on the gas
taps.
Replacing the hob nozzles
1. Remove the pan stands, burner caps and
flame-spreader crowns to access the
burner casings.
2. Replace the nozzles using a 7 mm
spanner according to the gas to be used
(see Burner and nozzle characteristics
tables).
3. Replace the burners in the correct
position.
28
Installation
Replacing the oven burner nozzle
1. Open the door and remove all
accessories from inside the oven.
2. Remove the shelf.
3. Unscrew the screw fastening the oven
burner to the base.
4. Push the burner towards the right until the
nozzle is accessible.
5. Replace the nozzle using a 7mm socket
wrench.