Smeg Oven Instructions For The User page 28

Adjusting the burner minimum setting
The oven thermostat is equipped with a
screw for adjusting the minimum. When
changing the type of gas supply, the
minimum must be adjusted as follows:
1. Light the oven burner and run it at full
power for 10-15 minutes with the door
closed and without the base. Then turn
the knob to the minimum temperature.
2. Slide off the knob and insert a straight
edge screwdriver to make the
adjustment.
3. If using liquid gas the adjustment screw
must be tightened clockwise to the very
end.
Burner and nozzle characteristics tables
1 NATURAL gas – G20 20 mbar
Rated heating capacity (kW)
Nozzle diameter (1/100 mm)
Pre-chamber (printed on nozzle)
Reduced capacity (W)
4 Liquid gas – G30/G31 30-37 mbar
Rated heating capacity (kW)
Nozzle diameter (1/100 mm)
Reduced capacity (W)
Rated capacity G30 (g/h)
Rated capacity G31 (g/h)
30
Installation
Lubricating the gas taps
Over time the gas taps may become difficult
to turn and get blocked. Clean them
internally and replace the grease.
AUX SR
1.0 1.8
72 97
(X) (Z)
400 500
AUX SR
1.0 1.8
50 65
400 500
76 127
75 125
Lubrication of the gas taps should
be performed by a specialised
technician.
R UR
3.0 3.9
115 135
(Y) (K)
800 1600
R UR
3.0 3.9
85 100
800 1600
218 284
214 279
Oven Grill
4.6 3.5
155 140
(H3) (H3)
1300 -
Oven Grill
4.6 3.5
102 91
1300 -
334 254
329 250