Smeg Oven Instructions For The User page 27

Replacing the gas grill nozzle
1. Open the door and remove all
accessories from inside the oven.
2. Unscrew the screw fastening the gas grill
burner to the upper part of the oven.
3. Push the burner towards the right until the
nozzle is accessible.
4. Replace the nozzle using a 7mm socket
wrench.
Installation
Adjusting the hob burner minimum
setting for natural gas
Light the burner and turn it to the minimum
position. Extract the gas tap knob and turn
the adjustment screw next to the tap rod
(depending on the model) until the correct
minimum flame is achieved.
Refit the knob and verify that the burner
flame is stable. Turn the knob rapidly from
the maximum to the minimum setting: the
flame should not go out. Repeat the
operation on all gas taps.
Adjusting the hob burner minimum
setting for LPG
Tighten the screw located at the side of the
tap rod clockwise all the way.
Following adjustment to a gas
other than the one originally set in
the factory, replace the gas setting
label fixed to the appliance with
the one corresponding to the new
gas. The label is inserted inside the
nozzle pack (where present).
29