Extending the functionality of the phone
Multiple handsets
Up to four handsets can be registered with the base.
Every device is assigned an internal name and internal number (INT 1 – INT 4). The assignment
can be changed.
All internal numbers are already assigned:
Registering a handset
Register HS or Put into base flashes on the display.
Registering by placing the handset in the base
¤
Place the handset in the base . . . Registering is shown on the display, the handset is regis-
tered automatically
Registering from the menu
Registration must be initiated both on the base and on the handset. Both must be
within 60 seconds.
On the handset
¤
Menu
Settings
of the base (default: 0000)
On the base
¤
Within 60 seconds of entering the system PIN, press and hold the registration/paging key for
a minimum of 3 seconds.
The registration process takes about 1 minute. Handsets are assigned the lowest avail-
able internal number (1 to 4). If internal numbers 1 to 4 are already assigned to other
devices, number 4 is overwritten.
De-registering a handset
You can de-register any other registered handset from any registered Gigaset handset.
¤
Menu
Settings
¤
Select the internal user to be de-registered. (The handset you are currently using is
marked with <.)
handset is registered. Put into base flashes on the display
OK
Handset
OK
The display shows Registering.
OK
Handset
OK
Enter the system PIN of the base (default: 0000)
Extending the functionality of the phone
De-register any devices no longer needed
OK
Register HS
OK
De-register HS
Enter the system PIN
OK
OK . . . the
29