Expanding The Functionality Of The Telephone; Multiple Handsets - Gigaset E390 A Manual

Expanding the functionality of the telephone

Multiple handsets

Up to six handsets can be registered to the base station.
Each registered device is assigned an internal number (1 – 6) and an internal name (INT 1 –
INT 6). The number or name assigned can be changed.
If all internal numbers have already been assigned at the base station:
that is no longer needed
Registering the handset
A handset can be registered on up to four base stations.
Registration must be initiated on the base station and on the handset.
Both must be carried out within 60 secs.
On the base station
¤
Press and hold the Registration/Paging key on the base station (approx. 3 secs)
On the handset
¤
. . . use
Handset OK . . . an available base station is sought
0000) OK
If the handset is already registered with four bases, select the base to be replaced by
the new base.
Once registration is complete, the handset returns to idle status. The internal number of the
handset appears in the display, e. g. INT 1. If not, repeat the procedure.
Maximum possible number of handsets registered to the base station (all internal
numbers assigned): The handset with the highest internal number is replaced by the
new one. If this is not possible, because a conversation is being held on this handset,
for example, the message No available internal number is given.
handset that is no longer required and repeat the registration procedure
to select Settings OK Registration
. . . Enter system PIN (default setting:
Multiple handsets
de-register a handset
OK Register
De-register a
55