Installation And Connection - Siemens HME 97 Series Operating Instructions Manual

Installation and connection

6
q Please follow the special assembly instructions.
q The mains voltage must correspond to the voltage
given on the rating plate.There should be a 16 amp
fuse (L/B auto).
q Always contact a qualified electrician if the outlet
has to be moved or the lead changed. If the
connection is no longer accessible after
installation, there must be local means of isolation
via an all pole isolation switch with air gap contact
separation.
q Never use multiple plugs, plug connectors or
extension leads. This could cause overloading and
ultimately fire.
Electrical connection. Warning! All appliances
with a 3 core lead must be earthed.
Please ensure that the voltage and current indicated
on the rating plate agrees with the voltage of your
electricity supply. 220/240 volts - (i.e., 220/240 V AC).