Before Using For The First Time; Setting The Clock - Siemens HME 97 Series Operating Instructions Manual

Before using for the first time

Setting the clock

1.
Press the j clock button.
Changing the time
e.g. from summer time to
winter time
Hiding the time
The time is shown again
When the appliance has been connected for the first
time, or after a power failure, three zeros will flash in
the clock display.
Set the time.
2.
Set the time using the rotary
knob.
Set as described in points 1 to 3.
It is possible to hide the time so that it continues to
count down in the background. The display is blank.
1.
Press the j clock button.
2.
Press the Stop button.
The time is now counting down in the background.
Should you wish to see the time briefly, press the j
clock button again.
Press the j clock button three times to set the time to
count down visibly in the display once more.
3.
Press the j clock button
again.
17