Installation And Connection; The Control Panel; Accessories - Siemens HF22M664 Instruction Manual

Installation and connection

This appliance is intended for domestic use only.
This appliance is only intended to be fully fitted in a kitchen.
Please observe the special installation instructions.
The appliance is fitted with a plug and must only be connected
to a properly-installed earthed socket. The fuse protection must
be rated at 10 amperes (L or B circuit breakers). The mains
voltage must correspond to the voltage specified on the rating
plate.

The control panel

Here, you will see an overview of the control panel. Depending
on the appliance model, individual details may differ.
1
Power selector
90 watts
180 watts
360 watts
600 watts
900 watts
2
Time switch
0 - 60 minutes
3
Door opener
6
The socket must be installed and the power cable replaced by
a qualified electrician only. If the plug is no longer accessible
following installation, an all-pin disconnecting device must be
present on the installation side, with a contact gap of at least
3 mm.
Multiple plugs, plug bars and extension leads must not be
used. Overloading can result in a risk of fire.

Accessories

Caution!
When removing dishes, make sure that the turntable does not
move. Make sure that the turntable is properly locked. The
turntable can turn left or right.
The turntable
How to fit the turntable:
Place the turntable ring a in the recess in the cooking
1.
compartment.
Let the turntable b slot in place in the drive c in the centre of
2.
the cooking compartment floor.
Note: Do not use the appliance if the turntable is not in place.
Ensure that it is properly slotted into place. The turntable can
turn clockwise or anti-clockwise.