Changing The Signal Duration - Siemens HME 97 Series Operating Instructions Manual

Correcting
Cancelling

Changing the signal duration

Procedure
q The alarm time is not interrupted if you open the
oven door.
q You can set a time of up to 23 hours and
59 minutes.
q You can see the alarm time in the display:
Press the a timer button.
Change the time by turning the rotary knob. Press
the a timer button again.
q The alarm time counts down in the background:
Press the a timer button.
The time appears. Then change the time
immediately as described above.
q Press the a timer button and Stop button.
q The alarm time counts down in the background:
Press the a timer button.
The alarm time will be visible.
Press the a timer button and Stop button.
A signal sounds for one minute after the set duration
has expired.
You can change the duration of the signal from
60 seconds to 6 seconds.
q The appliance must be switched off.
q Press the Start button for 6 seconds until you hear
a signal. 02 appears in the display.
The change has been entered.
You can change the signal duration to 60 seconds in
the same way.
55