Time And Date Display - SSANGYONG REXTON II 2006 Owner's Manual

TIME AND DATE DISPLAY

The time and date are displayed in the multi-station display window.
AM or PM
AM: Before noon
PM: After midday
Adjusting the Time and Date
1. Press and hold ( ) button on the multi-station switch
panel with the time and date displayed. It is switched to
the time and date adjustment mode and the selected item
is blinking.
2. Press ( ) button to move to the desired position (hour,
minutes, month, date or year).
3. Press ( ) button or ( ) button to change the time
and date.
4. Press ( ) button after adjustment to finish the adjust-
ment mode. Now, the display shows the changed time/
date.
NOTE
The display resumes Time/Date display mode if you do not press
any button within few seconds in Time/Date adjustment mode.
Page 19
Hour Minute
Year Month Date
Time Setting Using the Preset Function
1. Press and hold (
panel with the time and date displayed.
2. Press (
(Minute section start to blink).
3. Press and hold any of (
4. If the minutes section displays 00~29, it is reset to "00".
If the minutes section displays 30~59, the hour is in-
creased by 1 and the minute is reset to "00".
5. The clock starts to run immediately after releasing the
button.
6. Press (
ment mode. Now, the display shows the changed time/
date.
Day
) button on the multi-station switch
) button to move to the minutes section
) and ( ) buttons.
) button after adjustment to finish the adjust-
INTERIOR SWITCHES
2006-05-16, ¿ÀÈÄ 3:11
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
4-19