High Beam Indicator; Wd Indicators - SSANGYONG REXTON II 2006 Owner's Manual

Ssangyong rexton ii
Table of Contents

Advertisement

HIGH BEAM INDICATOR

0
This indicator illuminates when the high
1
beam headlamp is switched on.
2
3
4
WARNING
Driving with high beam headlamp disturbs the approaching vehicle's
5
visibility. For safe driving, use the high beam headlamp only when it
is very hard to see the road.
6
7
8
TURN SIGNAL/HAZARD WARNING INDICATOR
9
Turn Signal Indicator
This indicator blinks when the turn
10
signal switch is turned on.
11
Both indicators blink when the hazard
warning switch is turned on.
12
Hazard Warning Indicator
13
This indicator blinks when the hazard
14
warning switch is turned on.
15
16
5-18
INSTRUMENT CLUSTER
Page 18

4WD INDICATORS

The vehicle with AWD (All Wheel Drive) system doesn't have
the 4WD indicators and 4WD switch.
4WD Low Indicator
When shifting the driving mode to "4L",
this indicator blinks until the shifting
operation is completed. After comple-
tion of the mode change to 4L, the in-
dicator comes on.
4WD High Indicator
When shifting the driving mode from
"4L" to "4H", this indicator blinks until
the shifting operation is completed. Af-
ter completion of the mode change to
4H, the indicator comes on.
4WD Check Warning Light
This warning light comes on when the
ignition switch is turned to "ON" and
should go out if the system is normal.
If the "4WD CHECK" warning light
stays on, have the 4WD system
checked by a Ssangyong Dealer or Ssangyong Authorized Ser-
vice Center.
CAUTION
• If the "4WD CHECK" warning light stays on, have the 4WD system
checked.
• Do not drive your vehicle over 80 km/h in 4H mode.
2006-05-16, ¿ÀÈÄ 3:12

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the REXTON II 2006 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents

Save PDF