ANCHORAGE LOCATIONS
0
1
2
3
4
5
6
7
8
9
Child restraint anchor fittings have been installed to coin-
10
cide with the rear seating positions as follows.
11
WARNING
Unrestrained infants and small children could be injured.
12
• Never transport them unless they are properly restrained.
13
• Use restraint system which meet safety standard.
• Follow directions provided by the manufacturer.
14
15
NOTE
16
Use the child restraint anchorage for designed purpose only.
8-10
SEAT BELT AND AIR BAG
Page 10
CHILD RESTRAINT INSTALLATION
Rear
Front
Your vehicle has been designed to accommodate a child re-
straint on the rear seat. When using a child restraint, read the
installation instructions supplied with the child restraint and
follow the directions for fitment carefully. When installing the
child restraint, use the correct anchor bolt (5/16" bolt). The an-
chor bolt must be engaged at least 5 full threads in the
anchorage.
The child restraint system should be secured in conjunction
with the vehicle's seat belt. After installation, push and pull
the child restraint to be sure it is secure. Secure the child in
the restraint in accordance with the manufacturer's
instructions.
If you have any queries regarding the installation of a child
restraint, consult a Ssangyong Dealer.
2006-05-16, ¿ÀÈÄ 3:13
Need help?
Do you have a question about the REXTON II 2006 and is the answer not in the manual?