SSANGYONG REXTON II 2006 Owner's Manual page 30

0
PRECAUTIONS REGARDING UNAUTHORIZED MODIFICATION & ALTERATION (II)
1
Do not use the nonstandard tires, wheels, and other re-
2
lated parts.
Installing nonstandard tires such as tires with greater
3
width than prescribed can wear out the power delivery sys-
4 tem or friction-damage related parts. In addition, other
problems such as increase of fuel consumption and brak-
5
ing distance, vehicle's shudder, and decrease of steering
power can all degrade the vehicle's performance. The
6
speedometer and odometer can also become inaccurate.
The vehicle with automatic transmission may have the
7
shock in changing the speed.
8
Do not use duplicate key
9
A duplicate key might cause malfunction to the ignition key
cylinder and deter the ignition motor to return to the origi-
10
nal state. If so, electronic circuitry can be damaged and
may ignite from the ignition motor's continuing rotation.
11
Do not equip the sunroof or color glasses at your
12
discretion.
13
If you install a sunroof by cutting the vehicle's roof, rust
and leakage may occur in the cut part. Installing color
14
glasses to block ultraviolet rays and better appearance
may cause leakage and other many problems.
15
16
1-16
SAFETY PRECAUTIONS
Page 16
Do not equip the vehicle with bumper guards sold in the
market.
Installing bumper guard or other guard bars that are be-
ing sold in the market may cause problems in parking and
stopping due to the extended length of vehicle, and in-
crease in fuel cost due to additional vehicle weight, and
rusting may occur in the holes for equipping the guards.
And because of the absence of shock absorber in the
bumper guard, even accidents during low-speed driving
will be much serious compared with the damage that un-
modified cars might sustain.
Do not modify or replace the vehicle flooring or the seats
at your discretion.
• When replacing the interior flooring of vehicle with lami-
nated paper
To improve the comfort of cushion and to facilitate the
cleaning of the vehicle, some drivers replace the flooring
with laminated paper after removing the seats. However,
this may cause damage to the various electronic system
control units and wiring. This also may hinder the func-
tion of the seat rail that enables for the seat to move for-
ward and backward. In this case, the locking system to fix
the location of seats may malfunction, which might lead
to a serious accident if the loose seats tilt forward or back-
ward during an uphill climb or downhill descent.
2006-05-16, ¿ÀÈÄ 3:10