SSANGYONG REXTON II 2006 Owner's Manual page 124

GEAR POSITION DISPLAY ON INSTRUMENT CLUSTER
0
• In this position, you can only use the 1st gear
1
in the transmission. Use this position on long
mountainous terrains, steep hills, and rough off-
2
road. This also provides the engine brake ef-
3 fect on steep downhills.
4
• The drive position prevents the transmission
from shifting into the third or fourth gear. Se-
5
lect drive range 2 for more power when climb-
6 ing hills, for the engine braking effects when
driving down steep hills.
7
• At this position, the transmission is automati-
8
cally shifted from the 1st gear up to the 3rd gear
according to the vehicle speed. You can get the
9
engine brake effect when using this position
10
during downhill driving.
11
• Select this position for normal forward driving on
paved roads. In this position, the transmission
12
is automatically shifted from the 1st gear up to
13
the 4th gear according to the vehicle speed.
14
• In this position, the transmission is automati-
15
cally shifted from the 1st gear up to the 5th gear
according to the vehicle speed. Select this po-
16
sition for normal forward driving on paved roads.
6-12
TRANSMISSION AND BRAKE SYSTEM
Page 12
Manual Gear Shift Position
CAUTION
• When pushing and holding the manual gear shift switch, the gear
may be shifted through several steps in series. Make sure to shift
one step at a time.
• Please note that the gear may be upshifted if you fully depress the
accelerator pedal while driving with 1st, 2nd, 3rd, and 4th gear.
• If you apply excessive force when moving the manual gear shift
switch, the gear may not be shifted into other gears. Soft and smooth
operation is recommended.
2006-05-16, ¿ÀÈÄ 3:12