Assembly - Chicago Electric 67648 Set Up And Operating Instructions Manual

Assembly

installing the wheel guard
do not operate this tool without
the wheel guard properly
installed.
1
2
Gear Housing Rim
Figure 2
1. Using the Hex Wrench (55),
Socket Head Bolt (4) and slide the collar
of the Wheel Guard (3) over the rim of
the Gear Housing.
2. Rotate the Wheel Guard as needed to
shield you during the planned work.
3. Use the Hex Wrench (55) to tighten
the Socket Head Bolt securely. Check
the Wheel Guard to ensure it is firmly
in place. Adjust if necessary before
proceeding.
SKU 67648
tO preVent
SeriOuS injurY:
Wheel Guard (3)
3
Socket Head
Hex Wrench
Bolt (4)
(55)
loosen the
For technical questions, please call 1-800-444-3353.
installing the Auxiliary handle
do not operate this tool with one
hand only or without the
Auxiliary handle properly
installed.
Auxiliary Handle locations
Figure 2
1. The Auxiliary Handle (23) may be
installed in one of three positions,
on either side or on top of the Gear
Housing.
2. Screw the threaded end of the Auxiliary
Handle into the selected position.
Tighten securely before beginning work.
tO preVent
SeriOuS injurY:
Page 13