Connecting A Sound Source/Audio Input; Connecting Speakers/Audio Output; Connecting A Microphone - Medion PC Manual

Hide thumbs Also See for PC:

Table of Contents

Connecting a Sound Source/Audio Input

Diagram reference: H

This port is used to accommodate a connecting cable for external

analogue audio sources (i.e. stereo system, keyboard/synthe-

sizer).

1. Connect the cable with the 3.5 mm stereo jack plug to

the light-blue coloured socket (reference H).

Diagram reference: I

Here you can connect your headphones, active speakers or

audio connection cables for recording. Please refer to the user's

guide of your stereo installation for information about which con-

nector you should use (usually Line In or Aux).

1. Connect your headphones or active speakers by plugging

the cable with the 3.5 mm stereo jack plug into the green

socket (reference I).

Diagram reference: J

1. You can use the pink socket J to connect a microphone

with a 3.5 mm mono jack plug.

2. Position the microphone in such a way that it does not point

directly at the speakers. If you hear feedback, characterised

by loud whistling noises, reposition the microphone until the

sound stops.

Connecting

Table of Contents