Connecting A Sound Source/Audio Input; Connecting A Microphone; Antenna Connection For Tv / Radio Receiver - Medion PC Manual

C
ONNECTING A
D i a g r a m r
D i a g r a m r
This port is used to accommodate a connecting cable for external
audio sources (i.e. stereo system, keyboard/synthesizer).
1. Connect the cable with the 3.5 mm stereo jack plug to the
light-blue coloured socket (reference J). You can also connect a
stereo Cinch cable (position J2).
2. If you want to record a digital audio source use the (optional)
audio input T or T2. A SPDIF-Cinch cable will also be necessary
for the T while T2 is an optical output.
C
ONNECTING A
D i a g r a m r
D i a g r a m r
1. You can use the pink socket I to connect a microphone with a
3.5 mm mono jack plug.
2. Position the microphone in such a way that it does not point di-
rectly at the speakers. If you hear feedback, characterised by
loud whistling noises, reposition the microphone until the sound
stops.
A
NTENNA CONNECTION FOR
P o s i t i o n i n
P o s i t i o n i n
Should your PC be equipped with a TV tuner card, then you must
connect the corresponding 75 Ohm coaxial cables (aerial or cable)
for radio and TV reception.
1. Connect the supplied radio antenna with the corresponding
connector (Y) on the TV card.
2. Connect the TV connector on your TV card (Y2) with the aerial
antenna or cable TV.
You can watch digital TV through your satellite dish, if your PC
features a DVB-S connection (Y3) and your satellite installation
can receive digital programs.
22
S S
OUND
e f e r e n c e : J , J 2
e f e r e n c e : J , J 2
M
ICROPHONE
e f e r e n c e : I
e f e r e n c e : I
t h e f l a p - o u t o v
t h e f l a p - o u t o v
S
S
E T T I N G
E T T I N G
/A
OURCE UDIO
, T , T 2
, T , T 2
TV /
RADIO RECEIVER
e r v i e w : Y , Y 2 ,
e r v i e w : Y , Y 2 ,
U & G S
U & G S
P E T T I N G T
P E T T I N G T
I
NPUT
Y 3
Y 3
A R T E D
A R T E D