Connecting A Sound Source/Audio Input; Lan Connection; Connecting Ps/2 Devices - Medion 8850 Manual

Connecting a Sound Source/Audio Input

Diagram reference: F
This port is used to accommodate a connecting cable for external analogue audio sources
(i.e. stereo system, keyboard/synthesizer).
1. Connect the cable with the 3.5 mm stereo jack plug to the light-blue coloured
socket marked with the symbol
Note
You can also connect a sound system to the audio socket. For further infor-
mation, read the section beginning on page 43.

LAN Connection

Diagram reference: G
Your PC is equipped with a network connection, in order to prepare it for network opera-
tion.
The network cable usually has two RJ45 plugs so that it is unimportant which plug is con-
nected to which jack.
1. Connect the one plug of the cable to the PC jack
2. Connect the other plug to the other PC or hub/switch.
For further information refer to chapter

Connecting PS/2 Devices

Diagram reference: H
You can omit this step if you want to connect the mouse or keyboard set delivered with
your All-In-One PC.
1. Connect the mouse cable to the right, green PS/2 port.
2. Connect the keyboard to the left, blue PS/2 port.
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
(calls are charged at 7p per min from a standard landline, calls from mobiles could be higher)
.
"The network" starting at page 47.
- 19 -
.